You're a good friend
Receiver does not come up to me in Hong loader image I could not even help me
Results 141 to 150 of 158
-
01-29-2014,04:21 AM
-
01-29-2014,02:04 PM
the problem that report last days is back with the channel saved from other day the receiver crash also when put the channel of the problem.
-
-
01-31-2014,10:09 AM
uhub0
uhub0: 1 port with 1 removable, self powered
irq_num = 36 controller added
irq_num = 36 skipped
os_notify: Host bus 80b2d804 going into suspend
Insufficient buffer,L=453!
wid=0x500, hight=0x2d0
Insufficient buffer,L=453!
wid=0x500, hight=0x2d0
[AVCTRL] vid start AR : 16_9
[AVCTRL] _AvctrlEvtVdecCallback frame rate --NTSC60--
[_AvctrlVdecStoreFrameInfoProc] DecodeOnlyMode, First Frame was decoded
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]
[AVCTRL] _AvctrlEv
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]tVdecCallback sent vid dec ok
to midInsufficient buffer,L=453!
wid=0x500, hight=0x2d0
Insufficient buffer,L=453!
wid=0x500, hight=0x2d0
[AVCTRL] vid start AR : 16_9
[AVCTRL] _AvctrlEvtVdecCallback frame rate --NTSC60--
[_AvctrlVdecStoreFrameInfoProc] DecodeOnlyMode, First Frame was decoded
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]
[AVCTRL] _A
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]vctrlEvtVdecCallback sent vid
dec ok to mid320 NOT Support this fucntion : LAYER_DISP_SetBorder
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:480
SrcW:720, SrcH:480, WindowWidth:0
LAYER_DISP_DisplayCtrl, 0, 0
[AVCTRL]
[8559]AVCTRL_AutoAdjustAudRAWMode TO MODE[3] RAW[2]/PCM[3]SetSpeed fail, STC is
invalid
[AVCTRL] _AvctrlEvtAdecCallback sent aud stop to mid
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid
Receive Stop command and Notify,command[0]
[AVCTRL] _AvctrlEvtAdecCallback sent aud stop to mid
Receive Stop command and Notify,command[0]
320 NOT Support this fucntion : LAYER_DISP_SetBorder
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow1)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:480
SrcW:720, SrcH:480, WindowWidth:0
LAYER_DISP_DisplayCtrl, 1, 0
[DDC_DEC] mid_ddc_SetAudioType err
[DDC_DEC] mid_ddc_StartAudioDecoding err
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid PowerOn = 0
IGM_HardwareInit
IGM_InitialiseTimers
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Cannot engage Mobile font: ArInitFont () failed
error code (see bi_lib.h BI_ERROR_xxx): -51
+++++++++stCfgProxySetting.u8Enable = 1
normal get defacode=
.....
Actcoude
, MAC 06-0E-39-42lt cfg=255
###enter n-28-C2
[MMI] vid supportnit OK.....
[MMI] vid support param:mode if:0 ###ecType[rtService][532]###Netif0x10]
[MMI] vid support eneth):dhcp:1 ###port enDecType[0xce][536]###Netif param(d]
37]###Netif param(eth):[MMI] vid support enDecip:192.168.001.100 ###
[M]:_NET$$$$$$$$$$$$$$$$$$$$MI] vid support enDecTy$$$$$$$$$$$$!in dev(0)0x10]
[mid_net_if_ctrl:261]:r send request(4)!! pe[0x1]
[MMI] vType[0x2]
Create Instant Did support enDecType[0xelay Queue OK
[MMI] vid support enDecType[0x7] support enDecType[0x5]===
[AVCTRL] ecRet / DEC-RawStatus/ User-HDMI [0x2/0x0/0x3]
[AVCTRL] Sink AC3 [0] EAC3 [0]
[AVCTRL] The Sel-Path (bitwise) : < STATUS_NONE [0x0] STATUS_TRANSCODE[0x1] BY
PASS_HBR[0x2] BYPASS_DAC1[0x4] >
[AVCTRL] The DEC-RawStatus : (bitwise or)
-
01-31-2014,10:26 AM
You can not upgrade my receiver was broken friend with cable 232
-
02-25-2014,07:49 PM
using the media player function when playing back verified good files the audio seems to get ahead 3 seconds of the video within 1-2 minutes of starting the file.
Last edited by r10fret; 04-09-2014 at 10:12 PM.
-
02-26-2014,06:36 AM
I use it all the time and most all the time it works good. I have in the past seen it happen on one channel but do not remember which one.
-
05-07-2014,10:33 AM
X2 needs to check the Firmware in order to make it work with Newcamd servers using DES key other that 0102030405060708091011121314.
My service provider uses a different DES key and while the box says connected I get Scrambled Service all the time!
Just pass my request to the technical people!
-
-
05-07-2014,01:47 PM
I am just asking for a new feature to be added, if it is possible, to a current functionality that the makers already included in their product.
I have not mentioned any hack.
Anyway your profile says that you are a SAT Junkie not a moderator.
I will not tolerate your tone!