This plugin allows you to change the reseller id in your receiver's bootloader so other firmware(s) from similar receivers may be loaded.
I consider converting a receiver to run other software to be an advanced technique. Do not try this plugin unless you know what you are doing. The main features in the firmware will be the same in all of these receivers, so doing a conversion will probably not allow you to gain much.
You cannot expect any warranty coverage for a receiver that has been altered to run a different firmware and does not work.
Use at Your Own Risk! EB
List of receivers that can be converted with this plugin:
HS-7810 (Bitch 4stelliges 7 Segment Display) ==> LD 6.20
Quellcode
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
180x250000A0 Fortis HS-7810
0x250100A0 Optibox Anaconda
0x250200A0 Octagon SF 1008 SE+
0x250300A0 Rebox RE-4200
0x250300A0 UltraPlus 900
0x250500A0 Skyway Nano
0x250600A0 HD Box FS-9105
0x250700A0 Forever HS-7810
0x250800A0 Arcon Titan 1010
0x250900A0 Openbox S6
0x251004A0 I.Com HD-1080P
0x251200A0 Dynavision DV-7800
0x251300A0 GI S8680
0x251700A0 Elcomax Elux II
0x252000A0 Dreamsky HD6 [09]
0x252200A0 SkyS@t Classic
0x252300A0 Star Track SRT 2014
0x252700A0 Mediastar 900s
Loader Access Code = 0815
Results 1 to 1 of 1
-
HDF-Flasher-V620.09 Bootloader ID Changer – 05-05-2012,08:50 PM
Last edited by ViP3R; 12-05-2012 at 12:30 PM.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.