Tried the menu button with power cycle, no joy. Been down for awhile, not into reading 20+ pages of crap for an answer. Please help!
Happy Testing!!!
Thread: Stuck on Boot!
Results 1 to 10 of 25
-
Stuck on Boot! – 08-30-2019,05:39 PMX² HD Premium 36" 87 - 125 Ku
10' Unimesh 741 lnbf 97 C
-
08-30-2019,06:09 PM
when the receiver is powering up, are you holding the Menu Button down if you are try pushing the button fast up and down until you get a menu where you can choose another image in muliboot if you have other images.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Kiss My Ass
-
08-30-2019,06:31 PM
Been there, done that. Do what Chewie says, IF you have another good image in one of the other slots. If you do NOT, it won't work. In that case, you'd have to flash a new image to a slot.
My name is Mike.
My posting name at Satguys is Primestar31
-
08-30-2019,11:57 PM
Menu button not working to get blue screen, fast or slow. How do I get the flash to show up? What is the proper file setting to get the flash to be recognized?
Happy Testing!!!X² HD Premium 36" 87 - 125 Ku
10' Unimesh 741 lnbf 97 C
-
08-31-2019,07:00 AM
Explain EXACTLY what you did to make the receiver hang in boot. Also tell us if you have any other images installed in multiboot.
-
08-31-2019,11:13 AM
Have the sat dream na in slot 1, open pli in slot 2, cannot remember what is in slots 3 and 4. Did nothing out of the ordinary than an off on cycle when this issue arose. Have been useing other stbs since. Just got a new tv, so wanted to try and use the mio.
Happy Testing!!!X² HD Premium 36" 87 - 125 Ku
10' Unimesh 741 lnbf 97 C
-
08-31-2019,11:26 AM
Usually there is some sort of "help" from the user to get the MIO to become stuck in boot.
What does the tv screen display?
What does the MIO display?
Can you telnet to the box?
Have you tried manually accessing the multiboot menu by removing power from the box, then press the remote menu button repeatedly while restoring power to the box?
-
-
08-31-2019,01:49 PM
The tv is no signal. the mio shows boot. what is telnet? have tried power cycle with menu button, no joy. need to try flash to redo os. how to reset os to new.
Happy Testing!!!X² HD Premium 36" 87 - 125 Ku
10' Unimesh 741 lnbf 97 C
-
08-31-2019,01:59 PM
Download attached file.
Unzip once, and place the osmio4k folder onto usb stick.
Remove power from MIO.
Insert usb stick with osmio4k folder into back of receiver.
restore power to MIO and follow online instructions to flash image.
-
Post Thanks / Like - 1 Thanks, 3 Likes, 0 Kiss My Ass