4:2:2 Would be a good test. It is probably a moot point because it ha Az firmware in it.
My question is: Where is a 4:2:2 feed to test at this hour?
Thread: WARNING: AzBox Premium HD Plus counterfeit units now being sold in the North American market!
Results 101 to 110 of 161
-
03-08-2013,10:02 PM.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
03-08-2013,10:17 PM
The clone shipped with a 0.9.5020 AZBox Premium HD+ firmware.
Last edited by el bandido; 03-08-2013 at 10:27 PM.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
03-09-2013,12:10 AMAZBox Ultra HD, Amiko Mini HD265 + Amiko 8x1, 4x1 DiSEqC, 22KHz switches
80cm: 30w, 34.5w / 80cm: 117w, 123w / 80cm: 97w, 103w, 110w / 80cm: 99w, 105w / 75e: 87w, 91w, 97w / 60e: 101w / 60e: 125w, 129w / 60e: 107.3W, 111.1W (Shaw Direct)
Avatar: 2008 setup 61.5w, 72w or 74w (selectable), 79w, 87w
-
03-09-2013,12:55 AM
Thanks. i will check 107.3 in a bit.
I am not in a position to take pictures yet but I can describe some obvious differences my clone has.
(1) The AZBox logo is missing on the front of the receiver.
(2) There are 5 rows of vents on top.
(3) The bottom plate of the receiver is completely covered with rows of vents.
The clone shipped with what appears to be a very well constructed, genuine, AZBox remote..
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
03-09-2013,03:30 AM
All the clones I have looked at had the sigma chipset. I would think if it's running real Az firmware and has the sigma chipset it should in theory play 4:2:2. I have been looking at the clones quite a bit and it seems the quality varies quite a bit depending on who built the box and the price! but who knows it's hard to tell by pictures you could be looking at pics of the real deal! I'm still scared to buy a real or clone. The prices on the clones IMO is way way too high, and don't even get me started on the real deal, I mean they have been out of production for two years! SHEESH
Chris
7.5' Fully Aluminum Perfect 10 Mesh, Titanium C1 PLL C-Band only LNBF, Controlled by VBox 7 and DISEqC 1.2.
84e Modded PS Channel Master KU with STAB HH90, Eagle Aspen LNBF. Controlled with USALS.
DISEqC 4x1 switch.
X2 Premium + HD PVR Receiver.
Looking for a new Receiver...
-
-
03-09-2013,08:03 AM
Hmmnn.. looks like the fan is not from Korea. Pix #76
Last edited by Pixl; 03-09-2013 at 08:17 AM.
-
-
03-09-2013,08:42 AM
4:2:2 Works. Other Channels like Luken on 87 West C band do not. Upgrading to the latest firmware from 2012 did not help the Luken issue.
The clone was not shipped with an owner's manual.
The power supply looks identical to the original except it has generic markings on it. It is very easy to tell the difference between an original and clone power supply
The gift box does not have "Made in Korea" on it..
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
03-09-2013,09:13 AM
Thanks! I figured that 4.2.2. would probably work, but always best to get confirmation. After all, it's not like these are being built to Opensat specifications! LOL!
AZBox Ultra HD, Amiko Mini HD265 + Amiko 8x1, 4x1 DiSEqC, 22KHz switches
80cm: 30w, 34.5w / 80cm: 117w, 123w / 80cm: 97w, 103w, 110w / 80cm: 99w, 105w / 75e: 87w, 91w, 97w / 60e: 101w / 60e: 125w, 129w / 60e: 107.3W, 111.1W (Shaw Direct)
Avatar: 2008 setup 61.5w, 72w or 74w (selectable), 79w, 87w