I was using iptv on the X5 and I noticed that on the bottom of list its said usb, does that mean if we have a list of iptv channels we can enter through a usb?
Thread: iptv on X5
Results 1 to 9 of 9
-
iptv on X5 – 08-19-2013,01:09 PM
-
-
08-19-2013,01:51 PM
Looks like what im looking for, will try when I get home from work
Thank you
-
08-19-2013,01:52 PM
Yes, it works well. You should have a default list of 20 channels or so in the receiver. If you put the proper file on your usb stick, the receiver should read them and load that list as well. Then you can toggle between your list and the list on the receiver. I have found that sometimes you need to reboot the receiver after plugging in your usb drive with the list before it will recognize it.
Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
08-22-2013,07:46 PM
cant get usb to open, any ideas
I opened the list its shows a red button to push which i did but it wont work
Thanks
-
08-22-2013,08:55 PM
I have the list in the main directory on my usb drive. It is not hidden in a folder. It should work. Try turning off the power switch on the receiver and check again once it reboots. When mine doesn't work I always check to see if I have internet by checking youtube or whatever.
Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
08-23-2013,07:23 PM
rrob
Thanks again I change to another usb and didnt use folder it works
-
07-12-2014,08:24 AM
Good morning to everyone and for what I'm reading this receiver has the ability to read urls and we can custom the iptv with another channels vis usb something that the x2 premium receiver can not do.
God is good
-
07-12-2014,09:47 AM
You're right!!
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100