I've managed to get the Nemesis language from German to English, and the video set to 1080i, 60 hz. I now have a picture on the AV output, but just black from the HDMI output except a brief logo during boot. My trouble is trying to navigate the E2 menus and read the small print on the screen. This box seems similar to the Dream Box line up, maybe there is something I can load to get around this receive easier?
So far with much struggle I've managed to load the MeTv tp into one of the existing Euro sats and have it working.
Thread: Nemesis start up challange
Results 1 to 10 of 152
-
Nemesis start up challange – 10-30-2014,01:52 PMC: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
10-30-2014,03:54 PM
[Only registered and activated users can see links. ]
Download and install the OpenATV image dated 10-30 the link.
Then use FileZilla or something similar to copy the etc folder that is in the receiver. Zip the etc folder and post it here. I will see if I can make the needed changes if you will do that..
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
10-30-2014,08:37 PM
You can type the network ip of the Nemesis into your web browser of a computer that is connected to the same network and get a web interface for the Nemesis. Doing this will allow you to take screenshots of problem areas in the Nemesis menus.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
10-31-2014,04:11 AM
Pixl, which receiver are you using. I have been using EDG Nemesis on my Dreambox DM800Se for quite a few years so i maybe able to help as i know my way around the image quite well.
Are we talking about the same image?
Nano
Xtrend ET9500, 1m Gilbertini Dish with Fracarro 0.1db lnb, 75cm Visiosat BISAT G3a triple lnb dish, EMP Centauri IRS system, Technomate TM5402HD, AB Prismcube Ruby, Evo Xfinity Android, nBox 5800s & Amiko Alien 2
-
-
10-31-2014,10:42 AMC: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
10-31-2014,10:55 AM
[QUOTE=el bandido;76699][Only registered and activated users can see links. ]
Download and install the OpenATV image dated 10-30 the link.
Then use FileZilla or something similar to copy the etc folder that is in the receiver. Zip the etc folder and post it here. I will see if I can make the needed changes if you will do that.[/QU
EB,
I tried to log into the box using File Zilla and STBHD_LAN_MM. Neither would connect due to log in problems. What might the user name and password be?
I did get in with a browser pointed to the IP of the box. Here are screen shots of what I see.
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]C: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
-
10-31-2014,11:19 AM
UserName = root (lower case letters)
Password = root (lower case letters)
You can take a screenshot using the web interface under System Functions on the left side of the screen..
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
10-31-2014,12:14 PMC: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku