Start telnet and enter this command: cat /proc/bus/nim_sockets
If the device is not listed in the telnet output, try another usb port for the device, hard boot the receiver, and retest using the same telnet command.
If the device is listed in the output after entering the telnet command, carefully check the settings for the device in the Sundtek plugin.
Results 111 to 118 of 118
-
01-05-2017,06:33 PM
-
01-06-2017,09:56 PM
Thanks EB, I try the telnet and the receiver is not seen the Sandtek and is not the USB connectors, the plastic package came of the tuner, I think when I put the the plastic back and grab the PCB with my hands I zap it.
O well.
Regards.
Chewie
-
01-06-2017,10:02 PM
Contact Sundtek for a possible warranty or get a Hauppauge WinTv 850 from Ebay for a few dollars. The WinTv 850 gives epg as seen in this thread.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My AssViP3R, mountaineer thanked for this post
-
12-30-2017,01:49 PM
is this receiver capable of getting a SR of 52096?
There is an ESPN feed at G28 Cband 3740 V 52096...this receiver does not get a sniff...is it capable? I havent updated E2 in a while, but it is working like clock work and dont want to mess with it if it isnt capable.
thanks!!!!
-
12-30-2017,02:14 PM
No.
45,000 Is the limit..
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
12-30-2017,02:25 PM
thanks!!!
Know of anything that can get 52096 sr at 16apsk?
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
12-31-2017,12:38 AM
I cannot get channels from that transponder on anything that I have. Good Luck With that one!!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
12-31-2017,07:17 AM
Thank you for trying!!!