40.5 TP signal

If I'm not mistaken EB Turbo dish is prime focus. I would attribute that to dish size Turbo. The tp you scanned in with 63% signal quality is ERT channel of Greece. Also would like to add that whenever I have inserted the plate for circular sats in an lnbf I have never had much success. When I used to have a corotor II with lnbs I used to scan in approximately 100 open channels on Nss806.
 
You will need to enter some TPs manually. Even with a 6 footer the blindscan doesnt scan them in. Another thing you need to play with is changing polarities from V to H and viceversa. After doing this kind of trick I was able to scan in 140+ channels (scrambled + FTA)
 
Turbo is that a rack of ribs next to the dmx242? I have the same lnb but haven't used it yet for circular.
 
One thing you might try is removing the conical scalar ring and see what the lnb does by itself. I had some tranpsonders come in stronger without a scalar ring when I ran c band on a four foot dish. Some transponders were helped without the scalar ring, but the signal went down on others...Go figure. EB
 
el bandido said:
One thing you might try is removing the conical scalar ring and see what the lnb does by itself. I had some tranpsonders come in stronger without a scalar ring when I ran c band on a four foot dish. Some transponders were helped without the scalar ring, but the signal went down on others...Go figure. EB
Click to expand...

.................
 
Last edited:
Back
Top