Coming Soon: Zgemma H9s

el bandido

el bandido

TNAP-Images
Features:
+ günstige 4K E2
+ HBBTV sofort verfügbar
+ Stalker Plugin sofort verfügbar
+ Kodi Plugin kommt später
+ Blindscan Support H9S Model
+ PIP support
+ Transcoding H264 und H265
+ SD Card Slot


Specifications E2 Linux Satellite 4k UHD Receiver:
H9S HEVC-4K
CPU Processor:
– Hi3798MV200
– ARM Cortex A53 15000 DMIPS
– Quad core 64-bit
– 3D GPU Mali 450
Video/audio Output:
– HDMI 2.0a HDR
– CVBS video & R/L Audio
Configuration:
– NAND Flash 256MB
– 1GB DDR Memory
Media/data Input/output:
– 100Mbit RJ45
– USB 3.0-a SuperSpeed (4.8Gbit)
– USB2.0 HighSpeed (480Mbit)
– SD card
Tuner:
– DVB/S2x tuner
Video/audio decoder:
– HEVC 4kx2k@60 fps 10-bit decoding
– OpenGLES 2.0
– H.265/HEVC, VC-1, AVS+, H.264/AVC,MVC,Real,MPEG-1/2/4, VP6/8/9,and so on
– AAC-LC,HE AAC V1/V2,APE,FLAC,Ogg,AMR-NB/WB,G.711, AC3, Dolby Digital , FLAC, DTS

Support = OpenPLi, OpenATV, and other E2 groups.
Price = Around $150.00 U.S.

Will try to get more information on this receiver as it becomes available.
Look for more new enigma2 receivers with blindscan to be released this year.
 
Got a Mutant HD60 yesterday. Nice picture qualty but it needs some driver updates. No usb tuner, uses a different blindscan plugin and the blindscan only works with universl lnb and did not find anything on the low band 10700-11700. does not find very much on the upper band 11700-12750. highest transponder i found was 11949.
Does not have universal remote. tuner symbolrate 0-45000.
 
el bandido said:
LOL
Try it and see. Let us Know!
Click to expand...

No, The single tuner version of this receiver does not have good reviews, not sure if it can really blind scan, I ask in some forums, will see what they respond, There was some talk about the Mutant HD60 how good it maybe be, but as Megatron817 stated it has some problems.
I am very happy with My OS Mio and my Vu+ zero.
 
Got The Blindscan on the Mutant hd60 working with both Ku universal and standard lnb.
The problem was the plugin's frequencies start and stop is off and the lnb goes out of range so the scan gets trashed or not work at all.
Now that I have it working I still need to figure out the correct start-stop frequecies to use. That will take more testing.
 
Very good Megatron, I did purchased the Zgemma H9.2S and is a very fast receiver, very nice picture and sound, but the blind scan is not that good, I have a universal lnb and it scans some sats but misses a lot of the transponders and it does not scans all sats, the C-BAND is messed up, You can set the satellite for c-band but the blind scan screen has the wrong frequencies, it has the frequencies for the Universal lnb, so I don't know if there is going to be any corrections, I ask all over the forums and there is no response, it came with the Open ATV image and every time I press on blind scan it crashes and the same for the PurE2 image, the VIX and the Open PLI image do the scanning but as I mention is not very good.
The ATSC was not working when I first got it but now with the new Kernel it works fine, I think I saw a thread from you saying the Mutant hd60 works now with the new Kernel, I check the Zgemma Kernel and it has the same Kernel as you receiver.
The Changes that you did, is it hard to do? I want to learn this, maybe I can make some changes, let me know what you use, If you have to get a compiler, let me know which one you use.
Regards.
Chewie
 
Hello EB
Here is one I saved for the PurE2 image, well for some reason I can not upload it says invalid file.
I will try again.
Regards.
Chewie
 
Chewie, I just used the remote to change the start numbers and stop numbers. 11750-12150 seemed to scan 11700-12200.Even doing that it did not do an accurate job. I tried to change the blindscan plugin with the plugin from the Edision and the Zero4k but that did not work for some reason the plugin stays the same.
 
Well I got the mutant hd60 blindscan of 103w ku doing good.Needs to be done in two blindscans,
11750 start frequency, 12150 stop frequency and another with 12020 start and 12150 stop.
That second one works pretty good but the first one usually not alot found.
Between the two scans 40 something channels found.
Changed back to Openpli today but the ATSC still not working with it.
Was looking at the blindscan plugin and it looks the same as Edision but it sure operates completely different.
Is That controlled by the manufacturer? Would sure like to change it to be like the Edision and zero 4k.
 
For the Mutant hd60, try this:
Remove or Delete the blindscan pluging folder located in SystemPlugins, then reboot the box. See if blindscan still works.
 
Nope, does not work when removed.

I am using openpli and I can put the openpli blindscan folder from the Edision and it looks and works different than on the Edision.

This is what it shows.

Tuner
satellite
scan start frequency
scan stop frequency
Accuracy (higher is better) 1-5
Horizontal yes or no
Vertical yes or no
Search type Channels or save to xml file
Network search yes or no
Clear before scan yes or no That does not work
only free scan yes or no


You can't choose to scan tranponders separate. Scans every transponder found like the old blindscan use to do.
 
Delete that log from the receiver, then have the receiver crash while blinscanning. Doing that should make a new log. We are trying to find the location or source of the blindscan plugin. That is the whole idea.
 
I just put the Satdreamgr blindscan folder in and blindscan still works the same. I guess it needs the folder but it must be using another plugin somewhere else.
 
Back
Top