Nemesis start up challange

Pixl

Pixl

Legit VIP
I've managed to get the Nemesis language from German to English, and the video set to 1080i, 60 hz. I now have a picture on the AV output, but just black from the HDMI output except a brief logo during boot. My trouble is trying to navigate the E2 menus and read the small print on the screen. This box seems similar to the Dream Box line up, maybe there is something I can load to get around this receive easier?
So far with much struggle I've managed to load the MeTv tp into one of the existing Euro sats and have it working.
 
You can type the network ip of the Nemesis into your web browser of a computer that is connected to the same network and get a web interface for the Nemesis. Doing this will allow you to take screenshots of problem areas in the Nemesis menus.
 
Pixl, which receiver are you using. I have been using EDG Nemesis on my Dreambox DM800Se for quite a few years so i maybe able to help as i know my way around the image quite well.

Are we talking about the same image?

Nano
 

Attachments

  • screenshot.webp
    screenshot.webp
    25.5 KB · Views: 15
  • screenshot1.webp
    screenshot1.webp
    25.8 KB · Views: 15
Nano said:
Pixl, which receiver are you using. I have been using EDG Nemesis on my Dreambox DM800Se for quite a few years so i maybe able to help as i know my way around the image quite well. Are we talking about the same image?
Click to expand...

Nano,

This is the Atemio Nemesis just released in Germany, August 2014. So probably different than the Nemesis you have had for a few years.
 
el bandido said:
http://images.mynonpublic.com/openatv/beta/index.php?open=atemionemesis
Download and install the OpenATV image dated 10-30 the link.
Then use FileZilla or something similar to copy the etc folder that is in the receiver. Zip the etc folder and post it here. I will see if I can make the needed changes if you will do that.[/QU
EB,

I tried to log into the box using File Zilla and STBHD_LAN_MM. Neither would connect due to log in problems. What might the user name and password be?
I did get in with a browser pointed to the IP of the box. Here are screen shots of what I see.



Click to expand...
 
Pixl said:
Nano,

This is the Atemio Nemesis just released in Germany, August 2014. So probably different than the Nemesis you have had for a few years.
Click to expand...

What Nano was talking about was the Nemesis image, a rival OS to Enigma 1 for the early dreambox receivers, sadly while superior to enigma in many ways it never really took off for the other Enigma 2 based receivers.
 
UserName = root (lower case letters)
Password = root (lower case letters)

You can take a screenshot using the web interface under System Functions on the left side of the screen.
 
Pale-Rider said:
What Nano was talking about was the Nemesis image, a rival OS to Enigma 1 for the early dreambox receivers, sadly while superior to enigma in many ways it never really took off for the other Enigma 2 based receivers.
Click to expand...

Its still Enigma 2, written by EDG an Italian image team. Even now i think its probably the most stable image on my DM800Se and believe me i've had a lot of images on it :D I must admit the Nemesis receiver spec on paper is impressive, It should be interesting to read your thoughts and opinions on it the more you use it. It would be something i would look at myself.

Unfortunately I'm holding off buying new receivers at the moment, I have enough stuff to squeeze into the 20ft Container as it is before i move everything across the pond, Just waiting for the Visa to come through now :D

Nano
 
EB,

Ok, we're getting there. That got me in. I can see the "etc" folder, but now can't get it to transfer to the PC.


 
Very Good! We can deal with this.
What image are you using? Is this the OpenATV image I suggested or is it the image that came with the receiver?
 
OpenATV image dated 10-30 that you suggested. I've had a little look around in it and set one TP. It is easier to use than the original image, I think this could be the ticket I was looking for.
 
OK.
So that etc folder belongs to OpenATV...Excellent!

Do a factory default to clear all of the sky and other stuff that we cannot use. It will be almost like you flashed the image because the setup will start with AV settings and such. Do the factory default and I will get you some files together to transfer. You need American satellite file and some other stuff. Easy to install with FileZilla.
 
The satellite file is located at: /etc/tuxbox
You can copy /etc/tuxbox then paste it in the remote site address for FileZilla, then press enter and you should go right to the file location in the receiver.

Delete the satellites.xml that is in /etc/tuxbox. You may do this by highlighting the file and Right Click the mouse, then follow the prompts.
Next, unzip the attached satellites.xml file and use it to replace the original satellites.xml file that you deleted in /etc/tuxbox.

Reboot the box when finished and you should have a satellite file that has a bunch of good transponders in the American satellites.
 

Attachments

Back
Top