el bandido
TNAP-Images
This OpenPLi image supports the TBS5925 usb tuner. 16APSK, 32APSK, and ACM modes are supported.
Please post any questions or comments in the discussion thread. EB
To Activate TBS5925 once image is installed and running:
(1) Go to plugins and press the green remote button for downloadable plugins. Select and install the TBS5925 plugin listed under drivers.
(2) Download and Unzip the attached firmware file. Install it in the receiver's firmware folder located at /lib/firmware
(3) Connect the TBS5925 to the receiver, then Reboot the receiver.
These steps should activate the TBS5925 in this image.
You can discuss this Thread >>HERE<<.
Please post any questions or comments in the discussion thread. EB
To Activate TBS5925 once image is installed and running:
(1) Go to plugins and press the green remote button for downloadable plugins. Select and install the TBS5925 plugin listed under drivers.
(2) Download and Unzip the attached firmware file. Install it in the receiver's firmware folder located at /lib/firmware
(3) Connect the TBS5925 to the receiver, then Reboot the receiver.
These steps should activate the TBS5925 in this image.
You can discuss this Thread >>HERE<<.