TNAP4.2-Signal finder

lme

lme

Administrator
Administrator
Why is the signal finder bounce from 0.0db to 23.0db on every transponders, even on a dead transponder, every few seconds ?
see here:
1.webp2.webp
You can notice the time on the right corner.
This is confusing when using movement or fine movement, in positioner setup.
 
I'm not seeing the issue here with TNAP 4.2 test image but I have seen it in the past with older images. Maybe try a reboot.
 
Does go away for a try, then is back to stay.
hard to do a transponder / chan. scan.
it's recording all tps (dead or active) in the tp scan !!!
no other image does that.
 
Back
Top