Wifi dongle is working spot on and when you power up the x2III it only takes a few seconds before you see that you are connected on your screen. I still am having issues with the remote control though, it's almost as if I have to repeat the same command twice before it actually does it. The remote does work better and faster if it is pointed directly at the receiver but that should be the case at all times. Another thing I noticed today was when you go from tv to radio channels, there almost is no way of exiting back to tv channels. For example, I blind scanned Intelsat 25 at 31.5w today and the only tv channel is ORTM and the x2 III will only scan it in as a radio channel(no issue on my other receivers including the x2 premium). I exited out of the blind scan menu and went into radio where I did get the audio for this station, when I pressed the tv/radio button my display kept saying No Channel. I realise that there aren't any tv channels scanned in on that sat, a soft boot didn't help but rather I blind scanned another sat just to get out. No such issues on other sats that have both tv and radio channels scanned in.