Vu+Zero Arrival

thanks el bandido,what do you mean by make a backup image in my Vu+ Zero and post it.you mean zipping it after backing up and post?good looking out
 
Correct. It is called a backup image and will load the same as any other image. It will be zipped when posted.

What resolution does your tv need? 720, 1080...etc???
 
I made a back-up, then tested it and it will not load like a normal image. It does show up in the Openvix and could be installed if that image is loaded first. Making a backup with the Duo2 is not a problem. Don't know if I am doing something wrong or if it is an issue with the Zero. I can post the backup that will work with Openvix installed if you would like to try that.
 
good looking,yes i will.el bandido you can send that image when you are ready,does it contain the channel list?really need it thanks
 
Thats kind of the point, Flashing a new image as akin to wiping your PC and installing a fresh OS onto it, it wont retain any of the plugins you previously installed, only those included in the image by default and any that were included by @el bandido when he made the backup.
 
getoverit said:
i did load the files but i lost all plugins.did not get anything to work.will continue tomorrow,very confussing.thanks
Click to expand...
It is a good idea to make a backup before loading any files.
My antenna settings are in that image, so you will need to change them.
I installed several plugins including Kodi and TS Media. A channel and satellite editor is also installed.

Man Menu.webp Plugins Menu.webp Service Searching.webp
 
thanks for the image el bandido,after installing the image the main menu do not have any icon where to go get the plugins, i'am only seeing information for restart reboot etc,that it three icons only.should i reflash?thanks
 
Do not unzip or alter the download.
It is a bacxkup from Openvix, so you will need to install Openvix, insert the ZIPPED file onto usb drive and then restore it through Vix. I will post the exact steps in a bit.
 
getoverit said:
thanks for the image el bandido,after installing the image the main menu do not have any icon where to go get the plugins, i'am only seeing information for restart reboot etc,that it three icons only.should i reflash?thanks
Click to expand...

You should download and install the Openvix image. I will post the exact steps on how to restore using my backup.
 
Install Openvix
Install untouched downloaded backup image on usb drive and insert drive in the receiver.
Go to----> Menu---->Setup---->Vix---->Image Manager.
Highlight the downloaded image, then press OK on the remote.


Image manager.webp Restore Confirm.webp Restore_Wait.webp
 
el bandido said:
Install Openvix
Install untouched downloaded backup image on usb drive and insert drive in the receiver.
Go to----> Menu---->Setup---->Vix---->Image Manager.
Highlight the downloaded image, then press OK on the remote.


View attachment 10904 View attachment 10905 View attachment 10906
Click to expand...


After image manager the file wasn't there so I hit the yellow button for downloads and it and many other files were there so I hit the green button to download.
 
The Yellow button takes you to the Openvix image storage or repository. So you downloaded another Openvix image.

What I posted works. Check your usb drive and make sure the image file is on it zipped up.
Or try downloading the image file in post 27 directly onto the usb drive, then insert drive into receiver.
 
The zero started up as if it was new and the image isn't the same as yours. I just sent the file to my usb as I did before, I'll give it another shot.
 
Back
Top