C-BandStack (5150-5750)

[Frank69]

Hello good afternoon, I had posted a request in another forum, today I do it here if it would be possible to implement blindscan as ebs-pro and crazyscan programs do, without repeating Tps and with that having many repeated channels. Do you think it is possible?

The easiest is to continue using what I have, but I was forced to buy this type of lnb (One solution) Chinese, with range 5150-5750 by the implementation of the 5G in my area. I also know that TNAP in its latest versions handles Band C-5750 but does not do the blindscan correctly for this type of lnb, as described above. I think there is no image for E2 that I have this implemented in their software. Thanks.

 

[el bandido]

Buenas tardes / noches,

Gracias por tu mensaje. Para poder ayudarte correctamente con la implementación del blindscan usando tu LNB bandstacked, necesitamos que por favor expliques cómo funciona tu LNB, específicamente en lo relacionado a las frecuencias intermedias (IF) o de línea que utiliza.

Si no estás seguro sobre las frecuencias IF o de línea, por favor proporciónanos el fabricante (marca) y el modelo exacto del LNB, para que podamos investigar las especificaciones técnicas.

Además, ten en cuenta que este es un foro en inglés, por lo que te pedimos amablemente que escribas en inglés, si es posible. Esto permitirá que más personas puedan entenderte y ayudarte de manera más efectiva.

Saludos cordiales.

 

[Frank69]

Thank you edit the post.

I will investigate what you are asking for and upload the information.

 

[Frank69]

The brand name of the LNB says on the box One Cable Solution

 

[el bandido]

What fta receiver are you using? Make? Model?

 

[Frank69]

Hi, I am using an Octagon sf8008 because it has DefineOs a system that implements the blindscan correctly with the parameters 5150-5750.

 

[el bandido]

Which define OS? I need the build number or build ID.

 

[Frank69]

Octagon Define 7.0 OS V1.06.57 linuxos

This is the version of my Octagon

 

[el bandido]

I am working on a version to test. When will you be available?

 

[Frank69]

I can try from tomorrow until Sunday, when I will rest at home.

 

[el bandido]

Install 0406 Image from here: https://tnapimages.com/bandstacked/

The image has bandstacked setting:


The 0406 image should have correct channel changes for horizontal and vertical transponders.

Test for correct channel changes on Horizontal and Vertical transponders. Test for signal on Vertical and Horizontal transponders.
Vertical = 5150
Horizontal = 5750.
The bandstacked lnb should perform identical to 5150 lnb on channel changes.

Blindscan will be added after the correct channel changes are verified.

 

[Frank69]

I'll try it as soon as I get home. For the moment I thank you for your help.

 

[Frank69]

Hi, I tested several Tps in both H and V polarity and it works perfectly as if I had a 5100 lnb. I confirm then this image works very well. Tomorrow I will pull a DB with DBE from the Define Os image and send this to TNAP (CBAND-STACK) to do a manual scan with all the tps found under blindscan in Define Os.

Gracias @el bandido.

 

[el bandido]

Oye....Próxima corrección de Blindscan...

 

[el bandido]

Install 0408 Image from here: https://tnapimages.com/bandstacked/

With Satellite Blindscan....

 

[Frank69]

I will install right now and upload the results, thank you very much.

 

[Frank69]

I send you the results, I have the impression that it does the blindscan but it would be necessary to make some adjustments, since some tps are shown repeated and also channels, also for example the tp 3720v of the satellite 117w does not scan it.

 

[el bandido]

Polarities (H-V) Are reversed?

Which is correct?
5150 l.o. = H?
OR
5150 = V?

The current code we are using Now is: 5150 l.o. = V and 5750 = H

What is correct??? 5150 l.o. = H and 5750 l.o. = V ????

 

[Frank69]

I made an arrangement with two lnbs to also take the circular signal with the dielectric, this is the reason why I had to rotate one lnb (CENTRAL) so that they would not move so much and achieve better gain. Maybe I have a picture of my two lnbs....

 

[Frank69]

For some reason it is not scanning tps below 3750, this is a scan with TBS6983 card and EBS PRO, attached file, do you think you can try to fix it?

or is it something in the configuration that I have been missing?