Dreambox 800HD

To get to the debug/loader webif you have to switch off the box and then hold down the power button whilst pluging the PSU in.

You will then see on the OLED front display ***stop*** and an IP address underneath it.

When you see that type in the ip address shown on the front display into your pcs web browser. That will allow you to access the webif.

It should look similar to this.

webif.webp
 
Good luck :D

Its pretty much a doddle with the DM800 in all honesty providing you have the right image. Just double check the image from the link i gave you in the PM is the correct image before proceeding.
 
It's all good Manic but it took a few attempts until I realised that I needed to unzip the file. My DM800 hd is now running enigma2 with Merlin image. Now, I need to figure out what EB was helping me with with my NA sats.
 
Just use Dreambox edit.

From the Options function click on new profile then add your username and password and the Vu+ IP address and make sure you set it as Enigma 2 as pictured below from the options menu. Save it under Vu+

Do the same for the DM800

dbedit.webp

Download the settings using the FTP function from the Vu+ onto your pc. You can then edit it as you wish. When thats done, select the profile for the Dreambox then just upload it.

dbedit1.webp

I only ever do a master from my Gigablue 800HD and then transfer it to all my other Enigma2 boxes.
 
I decided to try another image and chose OpenVix but I would prefer one that has more options like Tsmedia. I will now attempt to transfer my settings from my vu+zero to the dm800 using dreambox editor:


grab(5).webp
 
Thats not OpenVIX mate. VIX don't officially support Dream Multimedia receivers. Its more than likely a modged version of OpenATV with VIX skins and VIX plugins like the OpenVix for SH4 receivers. Either that or its a ported version of Vix for the Vu+ Solo 1.

You won't get any support from any of the VIX team for that image, although if you are happy with it all well and done. There are plenty of images that have been ported over to the DM800 like Blackhole, but as with any ported image support is very limited.

The good thing with the DM800HD is that so many teams have done images for them you have probably more choice than any other receiver.
 
I'm having a slight issue with dreambox edit. After going to options it automatically recognizes my dreambox, which I don't have connected, on my vu+zero ip and when I hit the new profile button it doesn't do anything and still retains the same info of my dreambox.
 
manicscrewdriver said:
Thats not OpenVIX mate. VIX don't officially support Dream Multimedia receivers. Its more than likely a modged version of OpenATV with VIX skins and VIX plugins like the OpenVix for SH4 receivers. Either that or its a ported version of Vix for the Vu+ Solo 1.

You won't get any support from any of the VIX team for that image, although if you are happy with it all well and done. There are plenty of images that have been ported over to the DM800 like Blackhole, but as with any ported image support is very limited.

The good thing with the DM800HD is that so many teams have done images for them you have probably more choice than any other receiver.
Click to expand...

Any image you would suggest that would have more options? I'd like to decide on an image before tackling the vu settings. I find the image I'm using now is a bit buggy.
 
I flashed the latest image by ramiMaher-OoZoon and now am flashing Blackhole 2.1.5, we'll see what it looks like before actually keeping it. I'm also thinking of trying an OpenPli as well.
 
manicscrewdriver said:
Thats not OpenVIX mate. VIX don't officially support Dream Multimedia receivers. Its more than likely a modged version of OpenATV with VIX skins and VIX plugins like the OpenVix for SH4 receivers. Either that or its a ported version of Vix for the Vu+ Solo 1.

You won't get any support from any of the VIX team for that image, although if you are happy with it all well and done. There are plenty of images that have been ported over to the DM800 like Blackhole, but as with any ported image support is very limited.

The good thing with the DM800HD is that so many teams have done images for them you have probably more choice than any other receiver.
Click to expand...

Correct, although we did very briefly produce a limited run of the ViX 2.0 series images for DMM hardware, we just did not have any teams members with the correct receivers to test the images, so they were binned. We did also approach DMM them selves to offer official ViX support but they pretty much told us to go take a flying jump so we did.
 
I wasn't having much success with dreambox edit so I decided to use filezilla instead. I managed to transfer North American sat list to my dreambox from the file from my zero using filezilla, however the sat list incorporates all sats not just what I had on my zero, it's a start for now. I will be attempting the other 2 file transfer.

Telstar 12-15w


grab(7).webp
 
Use FileZilla to transfer the lamedb in etc/enigma2 and satellites.xml in etc/tuxbox.
Transferring the antenna settings is a bit more complicated.
 
I cant understand why you are having so much problems with Dreambox edit mate, Its never let me down once. You have to make a profile for both receivers, set the profile to the Vu+ and download the channel listings to the PC and then change profile to DM800 and then upload.

Works everytime mate.
 
Back
Top