FAC.Optibox.RAPTOR.v2.10.57

I only blind scan FTA ONLY so that explains why I do not see the bug you do. When I do make a mistake and scan ALL CHANNELS I have not had teh bad luck to have a SVC_x woitrh Powerview encryption it seems.

===
Bill
 
There are some open channels that will scan is as encrypted, so it is common for people to scan all channels and look at every one of them before deleting anything.
 
So tried this tonight on the birds mentioned above with Powerview encryption. I had no problem deleting the encrypted channels or had lockups trying to do so.

Only thing I did note though was the encrypted channels are now marked with a € sign rather than a $ sign now that I put on the 57 update.

===
Bill
 
Last edited:
How do you get out of PAL mode? Or reload the previous firmware without being able to see the screen? I just got the Raptor and upgraded it to .67 and now I can't see anything. The front panel asks me to choose a language and that's all. I did try using the remote V.format but to no avail.
Thanks,
Bob

mengram said:
I did the reset to factory default after I installed the new firmware and got stuck in PAL mode. It took about an hour to get out of that, had to reload the previous firmware version in order to see the menu settings. IMO, there should be a button on the remote to change between Pal and NTSC because you can't see the menu to change which mode it's in if you have a black screen. I also tried hooking it up to an older tv and all I could get then was a rolling screen (it rolled so fast I could not read the menu options).
I hope Optibox will get these issues worked out because I like the receiver having twin S2 tuners (no need for a switch which is one less headache).

mengram
Click to expand...
 
Last edited:
Back
Top