OpenVix Edision 4k Images Added to TNAP Server

I have no problem seeing the Edision osmini4k running OpenVix 6.9 on the network using Linux. Do I need to check using a Windows machine? Most likely, the problem lies in the way the receiver is configured.
 
Probably do that; in all other imagines, edision(s), can be seen in the network lan menu of the laptop(s) running windows 11.
As I said, before version 6.9.002, this was not an issue. Not a big problem for me.
 
The problem should be isolated to enigma2. To update Enigma2 from the terminal, log into the receiver with SSH or Telnet and run:

opkg update
opkg upgrade enigma2
then
reboot

Let me know if that corrects your receiver. Thanks.
 
I am going to put the Developer build up there and see how it does. Too much drama in the Release branch lately. So the image numbers will be different and an image Flash is highly suggested. Try only on one receiver and see how it does....
 
Disregard. Those commands are a moot point now as other problems were discovered. One of the two now happens. (1) We move to Developer and it works. Or (2) We freeze on Release .002 until things are sorted. Notice Vix does not have an 003 Image yet? They know it is problematic in Release. Let's see if Developer is better.
 
Back
Top