TNAP-7 Image Discussion

Hi everyone I flashed the TNAP 7 image into my dusty SF 4008 and it won't allow the remote to turn on the box.I can turn it off,but must turn it off and then using the rear power switch.I have tried both available images.Is there something I am missing?This image and the addition of blindscan gives this box a hold new lease on life! Thanks El Bandido
 
Hi everyone I flashed the TNAP 7 image into my dusty SF 4008 and it won't allow the remote to turn on the box.I can turn it off,but must turn it off and then using the rear power switch.I have tried both available images.Is there something I am missing?This image and the addition of blindscan gives this box a hold new lease on life! Thanks El Bandido
Seems like the power button on the remote is not toggling the standby. Until that is looked at by EB I know if you have the box on a network open webif in the browser and at the top right of the page there is a toggle switch that should bring it out of standby. If that doesn't work in webif on the Virtual remote there is a power button that will give you some options. Also in terminal you could issue the reboot command that will restart the box.
 
Hi everyone I flashed the TNAP 7 image into my dusty SF 4008 and it won't allow the remote to turn on the box.I can turn it off,but must turn it off and then using the rear power switch.I have tried both available images.Is there something I am missing?This image and the addition of blindscan gives this box a hold new lease on life! Thanks El Bandido
Hello, I also have this problem, but I thought it might be due to the age of my 4008. It doesn't bother me, it takes us back to the 20th century when to turn a device on and off you had to press the button on the front of it.
 
I have this problem too: the receiver goes into standby but cannot be woken up—neither via the remote control nor through the Webif. I’ve opted to map the "Power" button on the remote to the "Deep Standby" function; this way, you can wake the receiver up using the remote by triggering a GUI restart—which is better than having to reboot it using the switch on the back.
 
To be clear, There is no TNAP 7 @ VIX 6.9. Two different images. Two different distros with the feeds working for both. Shown is Openvix 6.9:

pli@pli-Precision-T5610:~$ ssh root@192.168.1.3
Warning: Permanently added '192.168.1.3' (ED25519) to the list of known hosts.
root@192.168.1.3's password:
root@osmio4k:~# opkg update
Downloading http://162.216.113.217/vix6.9/all/Packages.gz.
Updated source 'openvix-all'.
Downloading http://162.216.113.217/vix6.9/cortexa15hf-neon-vfpv4/Packages.gz.
Updated source 'openvix-cortexa15hf-neon-vfpv4'.
Downloading https://raw.githubusercontent.com/oe-alliance/enigma2-settings-feed/gh-pages/Packages.gz.
Updated source 'enigma2-settings-feed'.
Downloading https://raw.githubusercontent.com/oe-alliance/3rdparty-feed/gh-pages/Packages.gz.
Updated source 'oe-alliance-3rdparty-feed'.
Downloading https://raw.githubusercontent.com/oe-alliance/picons-feed/gh-pages/Packages.gz.
Updated source 'oe-alliance-picon-feed'.
Downloading http://162.216.113.217/vix6.9/osmio4k/Packages.gz.
Updated source 'openvix-osmio4k'.
root@osmio4k:~# 0;1;24M0;1;24m0;35;24M0;35;24m0;35;24M0;35;24m0;35;24M0;35;24m
 
To be clear, There is no TNAP 7 @ VIX 6.9. Two different images. Two different distros with the feeds working for both. Shown is Openvix 6.9:

pli@pli-Precision-T5610:~$ ssh root@192.168.1.3
Warning: Permanently added '192.168.1.3' (ED25519) to the list of known hosts.
root@192.168.1.3's password:
root@osmio4k:~# opkg update
Downloading http://162.216.113.217/vix6.9/all/Packages.gz.
Updated source 'openvix-all'.
Downloading http://162.216.113.217/vix6.9/cortexa15hf-neon-vfpv4/Packages.gz.
Updated source 'openvix-cortexa15hf-neon-vfpv4'.
Downloading https://raw.githubusercontent.com/oe-alliance/enigma2-settings-feed/gh-pages/Packages.gz.
Updated source 'enigma2-settings-feed'.
Downloading https://raw.githubusercontent.com/oe-alliance/3rdparty-feed/gh-pages/Packages.gz.
Updated source 'oe-alliance-3rdparty-feed'.
Downloading https://raw.githubusercontent.com/oe-alliance/picons-feed/gh-pages/Packages.gz.
Updated source 'oe-alliance-picon-feed'.
Downloading http://162.216.113.217/vix6.9/osmio4k/Packages.gz.
Updated source 'openvix-osmio4k'.
root@osmio4k:~# 0;1;24M0;1;24m0;35;24M0;35;24m0;35;24M0;35;24m0;35;24M0;35;24m
Ampersand was the intended character. As in &. And shorthand terminology was used. On my pc I was unable to access the website. As a coincidence. My receiver hung bad when it decided to check for updates. As was the same (hanging) when downloading plugins.
A further 'forever ping' showed many lapses. A slack way of describing adding the -t switch. Yeah. So I was just asking. It's probably my ISP fault. There's more it you're interested. Like being provided with both a docsis 3.1 modem to supplement my 3.0. With fallback connection simply because they can't GYST. An acronym for the creative.
 
Hi everyone I flashed the TNAP 7 image into my dusty SF 4008 and it won't allow the remote to turn on the box.I can turn it off,but must turn it off and then using the rear power switch.I have tried both available images.Is there something I am missing?This image and the addition of blindscan gives this box a hold new lease on life! Thanks El Bandido
The next update should fix this. If not, the next image will. Problem resolved.
 
Ampersand was the intended character. As in &. And shorthand terminology was used. On my pc I was unable to access the website. As a coincidence. My receiver hung bad when it decided to check for updates. As was the same (hanging) when downloading plugins.
A further 'forever ping' showed many lapses. A slack way of describing adding the -t switch. Yeah. So I was just asking. It's probably my ISP fault. There's more it you're interested. Like being provided with both a docsis 3.1 modem to supplement my 3.0. With fallback connection simply because they can't GYST. An acronym for the creative.
Please post any VIx image issues in the VIx thread. Thanks.
Vix Development has updates and also has errors. So i do not publish a Develop build from OpenVix.
The Release images from OpenVix almost always work, but for that, they are not updated often either. So a weekly update check will yield little.

Server logs show only a handful of users are on the Edision OpenVix image which really does not make it worthwhile to do much with. The current TNAP 7 has images for 11 receivers, and adding the Dreamone makes it 12. The Dreamone has its own Distro, TNAP has its own Distro, and OpenVix has its own Distro. Three Distros to maintain. This is a decent lot for a person to keep up with. I am considering dropping OpenVix altogether. We will see. Any Vix problems, please post in the Vix thread or on the OpenVix forum. Thanks
 
Hello El Bandido
A person (Pantasat) has developed a plugin to listen to DAB+ radio stations broadcasting on certain satellites in Europe (I don't know about the USA). This plugin works well with Ustym 4K Pro (OpenATV 7.6.0 image) (OpenBH 5.6.008 image). However, it displays an error message with TNAP7 images on Ustym 4K Pro and Octagon SF 4008. The plugin is attached.
Would it be possible for this to work with TNAP 7 on the 4008 and the Ustym?
Thanks in advance
Stephan94
 

Attachments

  • PantaSatDAB_20261114.zip
    PantaSatDAB_20261114.zip
    504.7 KB · Views: 2
  • Screenshot 2026-11-14 15-46-49.webp
    Screenshot 2026-11-14 15-46-49.webp
    42.1 KB · Views: 13
  • Screenshot 2026-11-14 17-51-01.webp
    Screenshot 2026-11-14 17-51-01.webp
    30.2 KB · Views: 8
  • Screenshot 2026-11-14 15-39-10.webp
    Screenshot 2026-11-14 15-39-10.webp
    25.7 KB · Views: 13
I'm happy to point it out, but

I don't know where I can find the error.

On the Ustyn and the MIO 4K Edition, the message "engine stopped (code1) audio player code1" appears.

and on 4008 "error2 no such file or directory: '/dev/dvb/adapter0/net0'
 
The plugin listed does not have an IPK, so dependencies can only be tracked in debug
Code:
-----------------------------------------------------------------------------------------------------
 ENGLISH
-----------------------------------------------------------------------------------------------------

WHAT IT IS
  Enigma2 plugin that receives DAB+ / DAB radio sent via satellite (EDI and ETI inside the DVB stream)
  and IP radio in MPE. It shows the song text and the pictures (slideshow).
  It also works on images without built-in DAB support (e.g. OpenATV 7.6).
  Tested on Octagon SF8008 with OpenATV 7.4, 7.6 and 8.1.

INSTALLATION
  1. Copy the folder "PantaSatDAB" to /usr/lib/enigma2/python/Plugins/Extensions/
  2. Restart the GUI (Menu > Standby / Restart > Restart GUI).
  3. The plugin appears in the plugin list as "PantaSat DAB".
  When opened for the first time, the plugin adds the missing transponders to the channel list
  (frequencies of transponder_dab.txt). No channel scan is needed.

USAGE
  - From the plugin: Satellite > Ensemble > Station, OK = listen.
  - Frequencies marked "not scanned: OK = tune and scan": OK = the plugin tunes and finds the stations.
  - MPE radios: BLUE button > "Install MPE radios" (taken from radio_ip.txt).
  - Enigma2 channel list: BLUE button > "Update DAB+ bouquet" = bouquet "DAB+" with one folder per
    satellite. Selecting a station starts playback with the radio frame (name, text, pictures).

PLUGIN BUTTONS
  OK      open the satellite / ensemble, listen to the station, tune and scan a frequency
  EXIT    go back, exits from the first level
  RED     stop playback
  GREEN   scan the tuned transponder (Auto or Manual PID)
  YELLOW  delete the satellite / ensemble / station under the cursor (asks first)
  BLUE    Update DAB+ bouquet / Install MPE radios / Remove stations

EDITABLE FILES (no restart needed)
  transponder_dab.txt  frequencies the plugin tunes and scans
  radio_ip.txt         MPE (IP) radios
  pid_noti.txt         DAB PIDs that the channel tables do not declare
  Instructions are inside each file. The station lists are in the folder "elenchi".

NOTES
  - A frequency up to +-4 MHz away counts as the same one (tuning offsets, LNB drift).
  - Not supported: GSE / BBframe (e.g. 23.5E 12641 V, NRK 0.8W) and ACM/VCM transponders.
  - Logs in case of errors: /tmp/pantasat_engine.log, pantasat_gst.log, pantasat_events.log,
    pantasat_scan.log
  - Open source: you may modify it freely, please just keep the credits.
 
Yes, I know, this plugin is installed directly in /usr/lib/enigma2/python/Plugins/Extensions
You can see the presentation of this plugin here.
You can read without being registered.
What can I do to enable debug mode?
 
Hello El Bandido
A person (Pantasat) has developed a plugin to listen to DAB+ radio stations broadcasting on certain satellites in Europe (I don't know about the USA). This plugin works well with Ustym 4K Pro (OpenATV 7.6.0 image) (OpenBH 5.6.008 image). However, it displays an error message with TNAP7 images on Ustym 4K Pro and Octagon SF 4008. The plugin is attached.
Would it be possible for this to work with TNAP 7 on the 4008 and the Ustym?
Thanks in advance
Stephan94
Try the attached plugin.
 

Attachments

Back
Top