X2 Premium Mini Pinout for RS232

I have a X2 Premium Mini new edition. The GXdownloader is to be used to recover, using any of the bin files for the X2 Premium Mini new edition. You need to hock up the data cable with no power on the receiver, open GXDownloader, choose bin file I used July premium_mini.bin ,you can use 30 Sept.bin if you want(there is no special file to recover just use update file), choose download then plug receiver in. it should start to load file.
 
Bricked my X2 this evening. I decided to update to the November software using network and all went fine until it rebooted...stuck in BOOT with no video output! Never had any issues with previous updates.

Dug out my old XP machine with a real RS232 port (glad I never got rid of it) and used the loader software I found on this site. I then cobbled together an RS232 cable using the pin outs provided above and that was a no go.

If you're building a cable to plug into a male RS232 port on your PC, this is what worked for me...
tivocable.webp
Tip goes to #2 (RxD), center goes to #3 (TxD) and the bottom goes to #5 (data ground). Numbering is basically a mirror image of what was posted.

Luckily everything is back up and running but I'm not about to try the November update again.
 
Last edited:
Back
Top