TNAP-6 Image Discussion

Work has begun on TNAP 7. If nothing changes, this will be custom build that is neither OpenPLi or OE Alliance, but instead has sources from both. Metas, or where the information resides to build for a particular receiver such as meta-octagon do not exist in this build and have to be manually added. This one promises to be different, providing it can be built to perform in a reliable manner. Sources to build an image such as this do not yet exist for OpenPLi or OE Alliance. We will see:
tnap-7-info20260126223839.webp
 
I'm using TNAP6 with 2025-11-29 updates, Enigma version 2025-07-19 (scarthgap) on my Edision OS Mio+ receiver. I have often used the new feature where you can copy an entire satellite's scanned results to a bouquet with one command while the satellite list is showing: Menu>Copy to bouquets.

When this works, it's fantastic. But it doesn't always work completely. After a reboot, a newly created bouquet might show instead N/A in place of the bouquet name and the bouquet is not available. I notice that when the command doesn't work that the necessary file in etc/enigma2 is not created. For example, the bouquet for 117.0W Ku is called: userbouquet.117.0WKu-bandEutelsat117WestAB-Services.tv.

As a workaround, I have been manually creating some bouquets using the remote control as in past. However, this has led to the Webif application not being able to list the bouquets. As a test, I deleted all bouquet files, then recreated a few using only the Copy to bouquets command. Doing this allowed me to once again see the bouquets in the Webif application.

Not sure if it's important...but I also use the iptv-org playlists plugin that automatically creates a bouquet for selected items. This plugin appears to work well.

I wonder if others are experiencing this?
 
That image was made almost 4 months ago??? It is very difficult to go back and revisit a stale image to look for clues as to why that is happening. Try flashing the 20260121 TNAP 6.1 image and see if the problem is still there. I can work with that image. The exact files for TNAP 6 I no longer have.
 
el bandido said:
That image was made almost 4 months ago??? It is very difficult to go back and revisit a stale image to look for clues as to why that is happening. Try flashing the 20260121 TNAP 6.1 image and see if the problem is still there. I can work with that image. The exact files for TNAP 6 I no longer have.
Click to expand...
Never knew this newer TNAP6 image was there. I upgraded online with it. I chose to auto-install rather than doing a clean new install which I usually prefer. If I don't resolve the issue, then I'll do a clean install and rescan the satellites.

I am seeing something similar with N/A still appearing after reboot but it seems to now even appear before I reboot in some cases. If you can check quickly just to see if you see the symptom, that would be useful. But don't spend too much time since it may just be some corruption in my receiver files.

I'm going to try erasing all bouquet associated files and build them again to see if this resolves it.
 
Yes. Absolutely. TNAP 7 is fairly close to completion. Run it and see what you can find wrong with it. Install it on a different slot is my suggestion...
 
el bandido said:
Yes. Absolutely. TNAP 7 is fairly close to completion. Run it and see what you can find wrong with it. Install it on a different slot is my suggestion...
Click to expand...
Done. It installed well. I am reconfiguring from scratch. So far; so good. I kept the other 3 slots with TNAP6. Hope TNAP7 supports the Hauppauge 950Q.
 
The TNAP 7 version disappeared this morning and is no longer available for download.
Where is it?
 

Attachments

  • where is version 7.webp
    where is version 7.webp
    80.3 KB · Views: 2
Greetings, what do you think of this tuner? Will it work well for blind scanning in C-band on an Octagon SF8008 V3, since the tuner on this receiver has blind scanning problems in C-band?

It will work with the TNAP image


5886332566019706651.webp
 
I have no idea....All that is shown is a picture.
What is the make and model of this tuner? Where can it be purchased?
What is the C band blindscan problem?
 
el bandido said:
I have no idea....All that is shown is a picture.
What is the make and model of this tuner? Where can it be purchased?
What is the C band blindscan problem?
Click to expand...
What another member posted in post 372

Sundtek SkyTV Dual UHD 2x (DVB-S/S2/S2X) It's sold in Europe.

....................................................................................................
Once again, thank you Bandido for all your help.

Now blindscanning is working fine after additional steps you gave me, but MGM channel's problem still persist :(

Still same problem, instead of getting 4060 H 30000 it downloads as 4066 H 30000 hence no Mgm channels at all.

Same problem appears to be in tp 4100 H 30000 but here blindscan download this tp as 4183 H 30000 and got all channels from this transponder, same with 4100 H 30000 4103H 30000 and got all channels also, seems like 3 additional extra points to any Tp the receiver "thinks" its OK and get all channels, but 6 additional points like the 4066 H mgm tp, and reciever says "NO" ..... "No Channels for You" like Jerry Seinfeld Soup haha.

Anyway, this confirms what you said before, this is a driver problem, and the only one that could fix this is Silabs Company, but i dont think they care too much about this problem anymore, they stopped updating drivers for this tuner back in 2021 i guess.... So i think we are screwed :( I dont know why Octagon company still using this tuners knowing all this problems they have, The use it in Octagon v1, then change to availink in version2 and now back to Silabs in this version3. Thank god i still have my Edision Os Mio+ 4K, this is really THE KING OF RECEIVERS as of today, i dont know why they stopped manufacturing this model. 2Gb of RAM versus 1GB in the Octagon makes a HUGE difference!!! , lets hope next year Octagon Version 4 comes with Availink tuners again and 2 GB of RAM.

Thank you Bandido, i really appreciate all your help, you are truly a FTA hobbyist, and some day, i wanna be like you :)
 
Back
Top