TNAP-7 Image Discussion

[el bandido]

Hello el bandido
The translation is now correct at the end of the scan.
However, C-band is still displayed after the channel search (even though satellite verification is no longer enabled).
The dB value for frequencies that are not locked is incorrect; it remains at the value of the last locked frequency.
(With version 6xx of TNAP, this worked correctly.)

Attach the satellites.xml file you are using. It may show the wrong C-band problem.

You are using the No T2MI driver which displays fake signals when Allow signal below lock is set to yes. Either change the driver or change Allow signal below lock to No. The 700 MHz Europe driver is probably better for you. Drivers can be changed using the driver selector plugin.

Driver Selector Plugin


Change to this and press the Green remote button to install the driver:


Change this setting if you want to use the No T2MI driver:


Will need to see the satellites.xml file you are using to understand the C band problem.

 

[stephan94]

Thanks, el bandido
After changing the driver (700 MHz Europe), it works for signals that aren't locked.
Here is the satellites.xml file