Megatron817
Administrator
Yes, Those are fixed on Mio+ 4k. Thanks
TNAP-7 Image Discussion
- Thread starter el bandido
- Start date
Tnap 7 last release 20.04.2026.
Wireguard vpn 16.2 (python 3.14)
The same error occurred again with the Wireguard VPN plugin from a few months ago:
The plugin checks the kernel module (it does this every time the plugin is started, whereas with other distributions, the check is only performed the first time) and opens correctly, but when selecting any server from the list, an error appears:
"The Wireguard kernel module was not loaded! Verify that Wireguard is installed in your image. Via telnet: opkg install wireguard-tools".
This problem was fixed some time ago but has now returned, perhaps following the latest Python update for the latest release on April 20th.
Wireguard vpn 16.2 (python 3.14)
The same error occurred again with the Wireguard VPN plugin from a few months ago:
The plugin checks the kernel module (it does this every time the plugin is started, whereas with other distributions, the check is only performed the first time) and opens correctly, but when selecting any server from the list, an error appears:
"The Wireguard kernel module was not loaded! Verify that Wireguard is installed in your image. Via telnet: opkg install wireguard-tools".
This problem was fixed some time ago but has now returned, perhaps following the latest Python update for the latest release on April 20th.
Attachments
el bandido
TNAP-Images
Everything needed for wireguard has existed on our feeds for months. For some reason, your plugin needs help. Our feeds are correct....
Run opkg update first, then install your tools as shown.
Code:
root@dual:~# opkg list | grep wireguard
enigma2-plugin-extensions-wireguard-tnap - 4.0+git0+3c1c57226e-r0 - WireGuard VPN Self-Hosted Server for TNAP
kernel-module-wireguard-4.4.35 - 4.4.35-4 - wireguard kernel module
wireguard kernel module; WireGuard secure network tunnel
wireguard-tools - 1.0.20210914-r0 - WireGuard is an extremely simple yet fast and modern VPN
wireguard-tools-bash-completion - 1.0.20210914-r0 - WireGuard is an extremely simple yet fast and modern VPN
wireguard-tools-doc - 1.0.20210914-r0 - WireGuard is an extremely simple yet fast and modern VPN - Documentation files
root@dual:~# opkg update
Downloading http://162.216.113.217/tnap6.1/all/Packages.gz.
Updated source 'TNAP-all'.
Downloading http://162.216.113.217/tnap6.1/cortexa15hf-neon-vfpv4/Packages.gz.
Updated source 'TNAP-cortexa15hf-neon-vfpv4'.
Downloading http://162.216.113.217/tnap6.1/dual/Packages.gz.
Updated source 'TNAP-dual'.
Downloading http://162.216.113.217/downloads/xDreamy-skin/Packages.gz.
Updated source 'TNAP-xdreamy'.
root@dual:~# opkg install wireguard-tools
Installing kernel-module-ip6-udp-tunnel-4.4.35 (4.4.35) on root
Downloading http://162.216.113.217/tnap6.1/dual/kernel-module-ip6-udp-tunnel-4.4.35_4.4.35-4_dual.ipk.
Installing kernel-module-udp-tunnel-4.4.35 (4.4.35) on root
Downloading http://162.216.113.217/tnap6.1/dual/kernel-module-udp-tunnel-4.4.35_4.4.35-4_dual.ipk.
Installing kernel-module-wireguard-4.4.35 (4.4.35) on root
Downloading http://162.216.113.217/tnap6.1/dual/kernel-module-wireguard-4.4.35_4.4.35-4_dual.ipk.
Installing wireguard-tools (1.0.20210914) on root
Downloading http://162.216.113.217/tnap6.1/cortexa15hf-neon-vfpv4/wireguard-tools_1.0.20210914-r0_cortexa15hf-neon-vfpv4.ipk.
Configuring kernel-module-ip6-udp-tunnel-4.4.35.
Configuring kernel-module-udp-tunnel-4.4.35.
Configuring kernel-module-wireguard-4.4.35.
Configuring wireguard-tools.
depmod: WARNING: could not open modules.builtin.modinfo at /lib/modules/4.4.35: No such file or directory
root@dual:~#Run opkg update first, then install your tools as shown.
el bandido
TNAP-Images
Boot-enigma2 logos plus display for Dual fixed today. Images online.
In fact, it was working fine until a week ago.
Now it boots normally but won't connect to the listed servers.
I tried installing the tools, but it doesn't install anything.
TNAP 7 dual /dev/pts/0
dual login: root
Password:
root@dual:~# opkg update
Downloading http://162.216.113.217/tnap-7/all/Packages.gz.
Updated source 'tnap-all'.
Downloading http://162.216.113.217/tnap-7/cortexa15hf-neon-vfpv4/Packages.gz.
Updated source 'tnap-cortexa15hf-neon-vfpv4'.
Downloading http://162.216.113.217/tnap-7/dual/Packages.gz.
Updated source 'tnap-dual'.
Downloading https://j00zek.github.io/eeRepo/Packages.gz.
Updated source 'opkg-j00zka'.
root@dual:~# opkg install wireguard-tools
No packages installed or removed.
el bandido
TNAP-Images
opkg install wireguard-tools
No packages installed or removed.
That means the tools are already installed. The madhouse wireguard is Closed Source. Contact madhouse about this error.
No packages installed or removed.
That means the tools are already installed. The madhouse wireguard is Closed Source. Contact madhouse about this error.
The 16.2 plugin worked perfectly until the TNAP release on April 20th, there's no point in asking Madhouse.
When I first launched the plugin and checked the kernel module, I noticed an error in the tools installation, but I didn't have time to read it carefully because the check screen then disappeared.
I believe that's the reason for the malfunction.
el bandido
TNAP-Images
The problem may be the nor python upgrade om 3.14.3 to 3.14.4
But even that does not make sense with the error you show. What VPN do you use? Maybe something could be built for it?
But even that does not make sense with the error you show. What VPN do you use? Maybe something could be built for it?
Last edited:
I've been using NordVPN for years without any issues with any distribution.
A few minutes ago, I tried a full backup of the April 17th release.
Even with that release, Wireguard doesn't connect to the servers and responds with that error.
The April 17th release, if I remember correctly, included Python 3.14.3.
So the error isn't due to the upgrade from Python 3.14.3 to 3.14.4.
I'll start by saying that I've already tried wireguard with distributions that use Python 3.14.4 (for example OATV), and it doesn't present any problems.
I also tried deleting the slot and doing a clean flash, but Wireguard still responds with the same error as soon as I select a server from the list.
I'd like to try your latest release with Python 3.13.
Could you send me the download link?
PS:
To install WireguardVPN, I use the command "wget "https://raw.githubusercontent.com/m4dhouse/Wireguard-Vpn/python3/WireGuard.py" -O - | python3".
If I try to install the plugin with the ipk file, the installation fails.
With other distributions, however, I can also install the plugin via ipk.
A few minutes ago, I tried a full backup of the April 17th release.
Even with that release, Wireguard doesn't connect to the servers and responds with that error.
The April 17th release, if I remember correctly, included Python 3.14.3.
So the error isn't due to the upgrade from Python 3.14.3 to 3.14.4.
I'll start by saying that I've already tried wireguard with distributions that use Python 3.14.4 (for example OATV), and it doesn't present any problems.
I also tried deleting the slot and doing a clean flash, but Wireguard still responds with the same error as soon as I select a server from the list.
I'd like to try your latest release with Python 3.13.
Could you send me the download link?
PS:
To install WireguardVPN, I use the command "wget "https://raw.githubusercontent.com/m4dhouse/Wireguard-Vpn/python3/WireGuard.py" -O - | python3".
If I try to install the plugin with the ipk file, the installation fails.
With other distributions, however, I can also install the plugin via ipk.
Last edited:
el bandido
TNAP-Images
That last build Is Today, which is on the Internet where the receiver can see it. Front display and boot-logos fixed in dual....
I already tried the latest build a little while ago.
I mean the latest build with Python 3.13.
If it works, we'll have proof that the error is caused by Python 3.14.
el bandido
TNAP-Images
Try the build from 10 days ago that is now on the Dual feeds.
Done. I just finished testing the build from 10 days ago, the one from April 18th, pulled from the feeds, Python 3.14.3, same problem with Wireguard.
I already tried a full backup of the April 17th build, same problem.
Maybe all these builds have Python 3.14.
Can you let me try your latest build with Python 3.13? Because I remember that until a few weeks ago the plugin worked great.
Without trying a build with Python 3.13, I don't think we'll get to the bottom of this. I'm wrapping up the tests for today; I have to go out.
Talk to you soon, thanks, bye!
I already tried a full backup of the April 17th build, same problem.
Maybe all these builds have Python 3.14.
Can you let me try your latest build with Python 3.13? Because I remember that until a few weeks ago the plugin worked great.
Without trying a build with Python 3.13, I don't think we'll get to the bottom of this. I'm wrapping up the tests for today; I have to go out.
Talk to you soon, thanks, bye!
el bandido
TNAP-Images
Today's image works with wireguard. Let me know if there are additional problems.
el bandido
TNAP-Images
We find that there is an automatic fstrim that was set by default for this image along with most OE alliance images. TNAP 7 Is the only image currently capable of trimming a M.2 drive. While I doubt the fstrim wiped the drive (apologies if it did), it would be a good idea to eliminate the cron job that you do not know about! Or leave it if you want it to run.
How to delete unwanted cron jobs Using terminal:
List crons:
crontab -l
Remove a specific entry (opens vi editor):
crontab -e
Navigate to the line, press dd to delete it, then Esc → :wq to save.
Remove ALL cron jobs for root (nuclear option — use with care):
crontab -r
There are also instructions available in the TNAP Help plugin.
fstrim thread here:
Tnap 7 04-20-2026...
Menu> setup> system> expert settings> storage devices> device manager> sdd1> action> trim file system
Tried the trim for ssd and it gave me an error message:
Also tried un-mounting it and same message appeared.
Menu> setup> system> expert settings> storage devices> device manager> sdd1> action> trim file system
Tried the trim for ssd and it gave me an error message:
Also tried un-mounting it and same message appeared.
The automatic install of cron has been eliminated from TNAP 7 images. We do not want things like fstrim running that the user does not know about!
Yes, thank you, I can now connect to the servers.
Is there anything I can do to prevent this screen from appearing every time I launch Wireguard?
With other distributions, the kernel module check is performed only once, when the plugin is first launched; after that, the check is not performed again, even after restarting the receiver.
Thanks again! Bye!
