TNAP-5 Image Discussion

[el bandido]

Discuss this Topic here.

Link to files:
OSMini4k = [Only registered and activated users can see links]
OSMio4k = [Only registered and activated users can see links]
OSMio4kplus = [Only registered and activated users can see links]
Octagon SF8008 = [Only registered and activated users can see links]
Ustym 4K S2 OTT X = [Only registered and activated users can see links]

[Hyper Casey]

Just loaded TNAP-5 for the Edision OSMio 4K Plus for the first time (via USB).

Cool background pic while booting!

So far so good.

Thanks elbandido and the testing team for your hare work, it is appreciated.!

[lme]

Can it be updated via online, or it's mandatory by USB ?

[el bandido]

I can't really answer that. You can try online and see what happens.

[lme]

I did an online software update and I have this:

17764

Also, the splash pic is still the same as it was on the test.

[el bandido]

Then Install one of these:
[Only registered and activated users can see links]

Installing a multiboot image is easy. Just select a slot with backup, then let it run until you have a tv picture again.

[el bandido]

The Octagon SF8008 has Hauppauge (850, some 950 models, 955Q) ATSC support!

[Only registered and activated users can see links]

[lme]

Then Install one of these:
[Only registered and activated users can see links]

Installing a multiboot image is easy. Just select a slot with backup, then let it run until you have a tv picture again.

I did installed it with multiboot. So far I'm missing the infobarweather only, but is not a biggy.

[el bandido]

The infobarweather may not be in the feeds. I will check as time permits. Thanks!

[lme]

The infobarweather may not be in the feeds. I will check as time permits. Thanks!

No, it is not yet.

[el bandido]

The infobarweather has to be added. It is not something that is built automatically. I have added it now, and it will be available when the feeds are updated. Will let you know. Thanks.

[Lee60]

Loaded TNAP 5 from online download yesterday. I have a question. In TNAP 4.2 when I push the green button it brings up a satellite list. After choosing a satellite I push the green button again and it brings up the scanned in channels.
In TNAP 5 the green button does no longer do this. Is there a way in 5 to do this?

Also I like to have my display on the front of the box turn off when I turn off the box. I wasn't able to find that either.

Thanks for your hard work. Oh and I don't have a clue how to add a file to my TNAP 5 slot. Can the 103 radio channels be added in updates or plugins(extras)?

Lee

EDIT: OK I found out how to pull up my satellite list. Bring up channel list. At the bottom is a button for satellite list.
Edit2: Ok solved the display being on in standby.

[Megatron817]

Loaded TNAP 5 from online download yesterday. I have a question. In TNAP 4.2 when I push the green button it brings up a satellite list. After choosing a satellite I push the green button again and it brings up the scanned in channels.
In TNAP 5 the green button does no longer do this. Is there a way in 5 to do this?

Also I like to have my display on the front of the box turn off when I turn off the box. I wasn't able to find that either.

Thanks for your hard work. Oh and I don't have a clue how to add a file to my TNAP 5 slot. Can the 103 radio channels be added in updates or plugins(extras)?

Lee

EDIT: OK I found out how to pull up my satellite list. Bring up channel list. At the bottom is a button for satellite list.
Edit2: Ok solved the display being on in standby.

I'll have to check to be for sure but the Radio on 103w ku should be there already unless you over wrote the preinstalled lamedb and satellite xml. Just need to configure the satellite 103.0w SES 3 Mood Radio mux. They are working here but I did over write every thing with my own configs. I will flash a fresh copy of tnap5 in slot 4 and check that.

[Megatron817]

I'll have to check to be for sure but the Radio on 103w ku should be there already unless you over wrote the preinstalled lamedb and satellite xml. Just need to configure the satellite 103.0w SES 3 Mood Radio mux. They are working here but I did over write every thing with my own configs. I will flash a fresh copy of tnap5 in slot 4 and check that.

Yes. The radio on 103ku is preinstalled with Tnap5. The satellite to configure is 102.9w ku-band Muzak Radio channels. switch to radio mode then find the 102.9w ku-band Muzak Radio channels in the satellite list.

[el bandido]

Interesting.

Loaded TNAP 5 from online download yesterday. .

TNAP 5 Should Not be available online as I have not yet included it in any previous feeds. So I wonder what you loaded?

Anyway, music channels on 103w-ku are included in a separate satellite so you can scan 103w-ku and not worry about losing the music channels. This was done because those music channels have to be manually entered into the receiver.

Default settings for TNAP 5 are shown below. This default will be overwritten if you "restore settings" that is different from this.

config.epg.freesat=false
config.epg.netmed=false
config.epg.viasat=false
config.misc.hotkey.blue=MenuPlugin/scan/blindscan
config.misc.hotkey.green=Infobar/openServiceList <--->Channel satellite listings
config.misc.hotkey.red=MenuPlugin/scan/positioner_setup
config.misc.videowizardenabled=false
config.Nims.0.configMode=advanced
config.Nims.1.configMode=advanced
config.ntp.timesync=ntp
config.plugins.bitrate.background=#54111112
config.plugins.bitrate.show_in_menu=infobar
config.plugins.bitrate.style_skin=compact
config.plugins.bitrate.x=1647
config.plugins.bitrate.y=822
config.plugins.bitrate.z=10
config.plugins.weathermsn.city=atlanta
config.plugins.weathermsn.degreetype=F
config.plugins.weathermsn.windtype=fts
config.skin.primary_skin=GlamourAuraFHD/skin.xml
config.usage.infobar_frontend_source=tuner
config.usage.setup_level=expert
config.usage.subnetwork_cable=true
config.usage.subnetwork_terrestrial=true

[lme]

"TNAP 5 Should Not be available online as I have not yet included it in any previous feeds. So I wonder what you loaded?"
Probably Tnap5-TEST version....
I did try online update for tnap5, but as you said, is not available yet.

[el bandido]

Online updates are now available. To update the feeds, run Software update in the receiver.

In terminal, type opkg update && opkg upgrade

[Lee60]

Yes I loaded TNAP-Test
I just ran updates too.
Will TNAP 5 be available soon online or should I download to usb?
I'm trying to remember the steps for flashing by usb. I'll read up on it. Can I flash from usb with backup?
Thank you for your help!

[el bandido]

The test image may have some trash in it. Get a known-to-be-good, EMPTY USB Flash drive. Then do the following:

Download the image that has multiboot in the extension. Do Not unzip it. Put this image in the flash drive.

Insert the flash drive into the receiver. In the receiver menus, go to Flash image. Select the image you installed on the usb drive fro downloaded images.

Select a slot that has with backup written beside. Press the ok button on the receiver remote.

Then do absolutely nothing for 5-10 minutes. Installing the image and restoring everything is done automatically if you follow these steps.

[Lee60]

Thank you el bandido. TNAP 5 with backup is now installed.
I then went to tuner config and 102.9 is there and I added my lnb ect.
If I remember in the past you don't scan for the channels.
I went to Radio and see my favorites(radio)
If i push the green button my satellite list comes up but no 102.9
I don't see it in web if either. Can you please help me out. I must be missing something or forgetting something.
Sorry to be such a pain.
Lee

EDIT: in signal finder I scanned the transponder and now have microspace61
hope I'm not making things worse

[el bandido]

Do you know how to use telnet?

[Lee60]

When I flashed TNAP5 from usb the first time
I used the 5 Test for backup. I just flashed TNAP5 again but with TNAP 4.2 as the backup.
I'm now running 5 with all my stuff. 102.9 radio is back!!!!!
Please ignore my previous posts. I'm good now.
Thank you
Lee

[Lee60]

I do not. I suspect I would just get myself in trouble:)

[lme]

Installed the infobarweather ext., and now there is strange "a" letter !!!
It wasn't there on the test version.

17772

[el bandido]

Is strange "a" letter color Green?

[lme]

Is strange "a" letter color Green?

No. It's white color.

[lme]

Missing "changerootpassword" to install from plugins browser/extension menu ?!?!?

[el bandido]

That small letter a is in that particular plugin. Let's see if they fix it.
Plugin changerootpassword will need to be python3 compatible. I will see if I can find such a version.

[lme]

Back to the infobar issue, found a pics from the 5-test version witch has no letter "a":

17773
17775

compare to now 5 version:

17774

[el bandido]

Most likely, there are two different versions of infobarwether.

What version of the infobarweather plugin does the test version have? You can find it by using telnet, opkg list-installed

This is what I have: enigma2-plugin-extensions-infobarweather - 2.0+git61+49c4a49-r0

[lme]

here is the 5-test version:
17776

here is the 5 version:
17777

opkg list-installed doesn't show infobar....

[lme]

Version 5; uninstalled infobar, reboot: the strange 'a' letter disapered.
Reinstalled it, and 'a' is back on the screen !!

[Megatron817]

Version 5; uninstalled infobar, reboot: the strange 'a' letter disapered.
Reinstalled it, and 'a' is back on the screen !!
EDIT
I found the old version from 2022 in an IPK

[lme]

EDIT
I found the old version from 2022 in an IPK

by the .py extension,i think is a python 2 version.

[Megatron817]

by the .py extension,i think is a python 2 version.

It works on tnap 5 but I did see if you want to uninstall it you got to uninstall with the Remove plugins red button-Extensions-InfobarWeather. Then use Dream-Explorer and remove the InfobarWeather folder at usr/lib/enigma2/python/Plugins/Extensions. Then reboot. If you don't delete the InfobarWeather folder you will have a crash loop. To fix that if it happens telnet init 4 then FTP in and delete the folder that way and then telnet reboot. All fixed. Probably better off to stick with the version in the feed.

[el bandido]

[Only registered and activated users can see links]

Should be properly fixed soon...

[el bandido]

TNAP 5 Feeds have been updated. Run software update in the receiver or in telnet, opkg update &&opkg upgrade

Octagon SF8008 continues to get ATSC updates. The signal meter for Hauppauge 950 ATSC tuner should work now.

Any feedback on how the Hauppauge ATSC tuners are working in the SF8008 would be appreciated. A lot of time has been spent adding ATSC to this receiver.

[lme]

For osmio+, there is no update available, and "changepassword" extension, is still missing.

[el bandido]

Please show the About page for the MIO+. Thanks.

[lme]

Here it is:

17784

[lme]

Updates available today, and "changepass" is on plugins/extension menu. Thx.
Reinstalled "infobarweather", but strange letter "a" is still there. Not a big deal.

[Hyper Casey]

Just loaded TNAP 5 to an Edision OS MINI 4K S2X Receiver.

Worked great, no problems loading, booting, and now watching SES1 Ku Band.

So elbandido, you can remove the "Note: OSmini4K have not been tested"

It loads, boots, and works, i have tested it.

Here is the link to the image, i used the usb version

[Only registered and activated users can see links]


Will post more as i test more.


Great job elbandido!



:hail:

[Megatron817]

Seems the Playing Videos with the YouTube plugin has stopped working for now. Google changed something again. They want their ad revenue. It's all about the moo-la.LOL

[el bandido]

Thanks for the information!
I will see about an update (If there is one).

[Megatron817]

Thanks for the information!
I will see about an update (If there is one).

I got the Youtube videos playing again but only some of the Live stuff. Had to lower the Maximum video resolution to 640x360 and turn off Use DASH MP4 format.

[el bandido]

Seems the Playing Videos with the YouTube plugin has stopped working for now. Google changed something again. They want their ad revenue. It's all about the moo-la.LOL

Please give an example or two of something that should play but doesn't. Thanks

[Megatron817]

Please give an example or two of something that should play but doesn't. Thanks
About anything I tried to play. I got it fixed now. I uninstalled version 1140 and installed 1133 and all is fine now.

Edit after a while git1133 stopped working with playing most videos again also.

[Megatron817]

About anything I tried to play. I got it fixed now. I uninstalled version 1140 and installed 1133 and all is fine now.

Edit after a while git1133 stopped working with playing most videos again also.

Git1132 is working so far. I need to use/check it for a while to be sure.

[Megatron817]

Git1132 is working so far. I need to use/check it for a while to be sure.
A few hours using git1132 and this version is working fine here. I got the max resolution at 1280x720 use Dash MP4 format turned ON.

[Megatron817]

I think OpenPLi needs to update the Openwebif for the Python3 and enigma2 client. Has the same version 1.5.2 as TNAP 4.2. Can't get OpenPli develop image or TNAP 5 image to work with Kodi and the enigma2 client on my Chrome cast. The Latest OpenVix image using Openwebif version 2.0.6 is working fine.
Not really a biggy for me as I can just boot into Vix or TNAP 4.2 when I want to use my Chrome cast and stream my channels in another room.

[Megatron817]

I think OpenPLi needs to update the Openwebif for the Python3 and enigma2 client. Has the same version 1.5.2 as TNAP 4.2. Can't get OpenPli develop image or TNAP 5 image to work with Kodi and the enigma2 client on my Chrome cast. The Latest OpenVix image using Openwebif version 2.0.6 is working fine.
Not really a biggy for me as I can just boot into Vix or TNAP 4.2 when I want to use my Chrome cast and stream my channels in another room.

Well now after testing the OpenPli 9-rc image with the same version of OpenWebif 1.5.2 the streaming to the enigma2 client works fine so I guess it must be something with the version of enigma2 develop and not OpenWebif.

[el bandido]

YouTube should be fixed with an online update.

[Megatron817]

YouTube should be fixed with an online update.

Thanks. The live videos froze up after a minute with the online update version 1141.
I am checking the latest git 1142 now and it is working ok here.
[Only registered and activated users can see links]

[el bandido]

Git1144 is being uploaded now...
enigma2-plugin-extensions-youtube - 1+git1141+29ad15f-r0 - 1+git1144+32d4a52-r0

[el bandido]

An online update Now should also give a newer openwebif.
enigma2-plugin-extensions-openwebif - 1.5.2-194-g4006cc16-r0 - 1.5.2-199-g7054c55a-r0

[clucas]

Here's my problem upgrading to TNAP-5 in slot 1. In TNAP-4.2, I had a setup for Intelsat 18 at 179.9. That didn't carry over to TNAP-5 so I went and blind scanned using NSS9 at 177.1W. I got my ABC Australia back but previously had a timer set up on 179.9. When I went to delete it I received an error on my Edision MIO 4k and the system rebooted. I then tried to reinstall the 4.2 from my backup but get an error and reboot again.

I couldn't figure out how to attach the log file so I just pasted it here:

OpenPLi Enigma2 crash log

crashdate=Thu Aug 31 00:16:55 2023
compiledate=Aug 20 2023
skin=Magic/skin.xml
sourcedate=2023-08-20
branch=develop
rev=1cc209e
component=Enigma2

stbmodel=osmio4k
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk1p3 rootfstype=ext4 rootwait mitigations=off
nimsockets=NIM Socket 0:
imageissue=TNAP 5 %h


Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action
File "/usr/lib/enigma2/python/Screens/TimerEdit.py", line 292, in removeTimerQuestion
File "/usr/lib/enigma2/python/StartEnigma.py", line 302, in openWithCallback
dlg = self.open(screen, *arguments, **kwargs)
File "/usr/lib/enigma2/python/StartEnigma.py", line 312, in open
dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
File "/usr/lib/enigma2/python/StartEnigma.py", line 255, in instantiateDialog
return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
File "/usr/lib/enigma2/python/StartEnigma.py", line 279, in doInstantiateDialog
dlg.applySkin()
File "/usr/lib/enigma2/python/Screens/Screen.py", line 240, in applySkin
File "/usr/lib/enigma2/python/Screens/Screen.py", line 269, in createGUIScreen
File "skin applet", line 20, in <module>
File "/usr/lib/enigma2/python/enigma.py", line 1249, in __init__
TypeError: in method 'new_ePoint', argument 1 of type 'int'
[ePyObject] (CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap object at 0xb1d37b68>>,('ShortcutActions', 'red')) failed)


dmesg

[el bandido]

Try installing TNAP 5 on an empty slot with no backup being used. Usually it is best to put the image on a blank usb stick when doing this so not backup will be present.

[clucas]

I gave up. I installed TNAP 5 in my empty slot 4 with no backup. It got stuck trying to boot to the new slot. I pulled the plug, thinking it would revert to booting to slot 1, but it got stuck booting again. I did a USB force install of 4.2 and was able to restore the last backup I made. I'm working again but with TNAP 4.2. My slot 4 is showing TNAP 5 with no backup. Going on vacation so I may attempt the update once I return.

[el bandido]

Something is not right.
Where did you download TNAP 5 from?

[clucas]

Your TNAP-5 Images for Edision OSMio4k thread.
[Only registered and activated users can see links]
Did the multiboot and all went well on the install except satellite 179.9 did not show up in the list and I had two timers set to record that satellite weekly. Since the satellite was not there the channel was greyed out. Trying to delete the timers caused the error.

[el bandido]

Don't use the Magic skin. Looks like this skin needs to be deleted from the TNAP5 feeds!

Delete this line in /etc/enigma2/settings
config.skin.primary_skin=Magic/skin.xml

In telnet:
Init 4
Delete line shown above in the settings file
init 3

[clucas]

I only tried the Magic skin because on my older Sony TV, the edges are cut off. (No way to adjust it as far as I know.) That means I don't see the last digit or letter of the menu screens and can't see the descriptions of the color buttons. I'm currently using Pd1loi-HD-night skin on TNAP 4.2 since I can at least see a partial digit or letter on the menus and partial word on the color buttons. It looks like the text size is larger on Magic too, which I liked. I'll get rid of it if it's going to be a problem. Vacation starts for me so I'll be away for a couple weeks and won't try TNAP 5 until I'm back. Thank you E.B.

[el bandido]

There are ways to resize the screen. Let me know when you come back. Enjoy your vacation!

[stephan94]

excuse me for this question which is not directly linked to TNAP 5
My MIO4k is completely blocked (after a flash that didn't work properly) on one of the four images of the multiboot (it remains at 99% and is blocked) so I can't take another image.
because I no longer have access to the menu
I knew that you can directly call up the list of the four images of the multiboot when you plug in the socket
and pressing one or more buttons on the remote control and then being able to choose an image that works, I've unfortunately forgotten how.
If someone could explain it to me, that would be great, because at the moment my edision is unusable.

[stephan94]

I found the answer
press menu several times when boot appears

[el bandido]

Online updates (10-10-2023) for TNAP 5 are available in the Software update menu of the receiver. You may also update using telnet commands opkg update && opkg upgrade

More items have been removed from the enigma2 scan files which opens up the scan. Opening up the scan will allow more channels and services to be found, but at the same time, can also allow duplicate services. This needs to be tested on different satellite dish systems. Please report any duplicate channels or other problems that are seen in scanning after this update. Thanks.

[el bandido]

117w C band is a very interesting satellite to blindscan. Seems there is a little bit of everything on this satellite. I made a blindscan video of 117w after the latest TNAP updates were installed. I don't see any duplicate channels or problems with the MIO 4K after installing these updates. A scan log is also attached.



[Only registered and activated users can see links]

[el bandido]

The Octagon SF8008 performs similar, but also slightly different than the current line of Edision 4K receivers.

As a comparison, Both the Mio 4K and the SF8008 will at times miss transponders with channels. The Mio4K(s) and the SF8008 will also find transponders that do not seem to exist.

The SF8008 blindscans noticeably slower than the Mio 4K receivers, but the SF8008 seems to be more consistent and logs more transponders both real and imagined.

So there are pluses and minuses to the Edision 4K receivers and the Octagon SF8008. Currently though, these are the best enigma2 blindscan receivers that I know about.

Attached are the blindscan results for 117w using the latest TNAP updates. Occasionally the SF8008 will duplicate a transponder with channels, but it is not enough to be aggravating. I haven't caught the Edision 4K receivers making duplicates yet.

The enigma2 debug has been altered as to what the scan shows in enigma2 debug log (terminal init 4 5 second pause, then [B]enigma2 [/B). Transponder results are shown at the end of the scan in the log as shown blue below:
No Transponders left: 63 Transponders Scanned, 2 Transponders Unavailable, 61 Transponders in /etc/lamedb.
What that means is the SF8008 found 65 transponders, 2 transponders could not be scanned for unknown reasons, and 61 transponders had channels. IMO, That is not bad!

Attached is the scan log and enigma2 debug log for the SF8008 blindscan of 117w.

[MrJames]

The blind scan does seem better. Before, I was having trouble detecting all the transponders on 99W Ku-band. I even tried setting the position to 99.0 instead of 99.2 because some people say that the listings that have 99.2 are actually referring to the DirecTV satellite, but still couldn't get everything to show up every time on one scan.

[cyberham]

Just downloaded TNAP5 to a spare slot. I have been using TNAP4.1. TNAP5 seems to be running fine.

I heard a rumour that if using a Hauppauge OTA USB receiver that TNAP5 will now display the SNR just like for satellites. But I find TNAP5 is the same as TNAP4.1 in this regard and only displays AGC value and BER. Anybody know if SNR readout is supported for OTA?

[el bandido]

Did you do the online update???? Or in telnet: opkg update && opkg upgrade

[cyberham]

I downloaded the image 2023-07-17 to my PC from the TNAP5 folder. I transferred it to USB stick and loaded it from the Mio+ menus.

ADDED: I see now I can update the software via the Mio+ menus. I will do that now.

ADDED2: What do you know? SNR is working! Cool. Did I mention I was pleasantly surprised by the new TNAP5 graphic at startup? Every nerd gets to look at his anime dream each time he reboots.

I manually configured my satellites since I like to review them periodically anyway. I imported from my TNAP4.1 image my old bouquets so I didn't need to reconfigure all of them which was good. I now have TNAP5 up and running as my main image.

I like the Pluto TV feature. Lots of favourite channels are now in a bouquet which makes them easy to find and use. SNR readout on ATSC allowed me to grab 4 new UHF OTA channels. I see an improvement in the Positioner Setup function. Blind scanning is working better. Overall, I recommend anybody to update to this image.

[EnoSat]

No Transponders left: 63 Transponders Scanned, 2 Transponders Unavailable, 61 Transponders in /etc/lamedb.
What that means is the SF8008 found 65 transponders, 2 transponders could not be scanned for unknown reasons, and 61 transponders had channels. IMO, That is not bad!

[eDVBFrontend0] prepare_sat System 1 Freq 3999000 Pol 1 SR 1167000 INV 0 FEC 3 orbpos 2429 system 1 modulation 1 pilot 0, rolloff 2, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1751 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] sleep 75ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e01038f0(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] sleep 70ms
[eDVBFrontend0] sendDiseqc: e01038f0(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 20000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 8, inversion off, m_tuning 2
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBFrontend0] fe event: status 10, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[scan.cpp-#388] got sdt -1
[scan.cpp-#415] got pat, err -1
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[scan.cpp-#388] got sdt -1
[scan.cpp-#886] Transponder Search Complete!
[scan.cpp-#1025] the current channel's ID was not corrected - not adding channel

[eelstrebor]

If doing this via USB, does the thumbdrive have to formatted FAT16 or FAT32 or some other format?

[el bandido]

Doing What through usb? What are you trying to do?

In general, there is no reason to format usb drives --unless they are not seen or recognized in the receiver.

[el bandido]

[eDVBFrontend0] prepare_sat System 1 Freq 3999000 Pol 1 SR 1167000 INV 0 FEC 3 orbpos 2429 system 1 modulation 1 pilot 0, rolloff 2, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1751 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] sleep 75ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e01038f0(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] sleep 70ms
[eDVBFrontend0] sendDiseqc: e01038f0(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 20000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 8, inversion off, m_tuning 2
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBFrontend0] fe event: status 10, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[scan.cpp-#388] got sdt -1
[scan.cpp-#415] got pat, err -1
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[scan.cpp-#388] got sdt -1
[scan.cpp-#886] Transponder Search Complete!
[scan.cpp-#1025] the current channel's ID was not corrected - not adding channel

What are you trying to show here? A good channel not being recognized or something else? I have no clue what satellite this belongs to....

(Maybe I should look....orbpos 2429 (117.1w)

[eelstrebor]

I installed TNAP5 and found (so far) that the timers don't work properly. Two days in a row I had the timer set to record a 30 minute program but only about 3-5 minutes got recorded. I rebooted to TNAP4.2 and got a good 30 minute recording on another program.

[eelstrebor]

delete

[eelstrebor]

Doing What through usb? What are you trying to do?

In general, there is no reason to format usb drives --unless they are not seen or recognized in the receiver.

Turned out that someone had a bad copy of TNAP5.

[el bandido]

I installed TNAP5 and found (so far) that the timers don't work properly. Two days in a row I had the timer set to record a 30 minute program but only about 3-5 minutes got recorded. I rebooted to TNAP4.2 and got a good 30 minute recording on another program.

Should not be any changes or difference in the timer area from 4.2 to 5.0 but I guess anything is possible.

Post the timer files that you are using and we will see if your problem can be duplicated.

[eelstrebor]

Should not be any changes or difference in the timer area from 4.2 to 5.0 but I guess anything is possible.

Post the timer files that you are using and we will see if your problem can be duplicated.

How do I do that? BTW, I played with TNAP5 timers again and found that even though I set the timer for today it advanced the record date by 1 day all on its own.

[el bandido]

The timers.xml file located at: /etc/enigma2 in receiver files will have saved timed recording information.

[el bandido]

Also, Forgot to ask: Have you done an online update? or opkg update && opkg upgrade in telnet?

[eelstrebor]

Also, Forgot to ask: Have you done an online update? or opkg update && opkg upgrade in telnet?

Yes

[eelstrebor]

The timers.xml file located at: /etc/enigma2 in receiver files will have saved timed recording information.
Your site wouldn't take the upload as an attachment. It said "invalid file".

<?xml version="1.0" ?>
<timers>
<timer begin="1703116800" end="1703118540" serviceref="1:0:1:3:1:FF37:A2F1018:0:0:0:" repeated="127" name="ABC" description="ABC" afterevent="standby" eit="0" location="/media/usb/movie/" justplay="0" always_zap="1" pipzap="0" zap_wakeup="always" rename_repeat="1" conflict_detection="1" descramble="1" record_ecm="0">
</timer>
</timers>

[el bandido]

Most file types need to be zipped before they are attached. :zip:

[el bandido]

Looks like you are wanting to record ABC 7 on 993w from 7pm to 7:29pm, Correct? What transponder frequency do you have for this channel? Check your receiver and see.

[eelstrebor]

Most file types need to be zipped before they are attached. :zip:

I'll try to remember that next time.

[eelstrebor]

Looks like you are wanting to record ABC 7 on 993w from 7pm to 7:29pm, Correct? What transponder frequency do you have for this channel? Check your receiver and see.

ABC7 on 99W C-band from 1830 to 1900 EST everyday. That's when I normally record. Transponder freq has been the same for years. 4120H30000-9/10 8PSK DVB-S2. Recordings work fine on TNAP4.2.

[el bandido]

Okay. So this is what you want:

ABC7 on 99W C-band from 1830 to 1900 EST everyday. That's when I normally record. Transponder freq has been the same for years. 4120H30000-9/10 8PSK DVB-S2. Recordings work fine on TNAP4.2.

But this is what you have:

Your site wouldn't take the upload as an attachment. It said "invalid file".

<?xml version="1.0" ?>
<timers>
<timer begin="1703116800" end="1703118540" serviceref="1:0:1:3:1:FF37:A2F1018:0:0:0:" repeated="127" name="ABC" description="ABC" afterevent="standby" eit="0" location="/media/usb/movie/" justplay="0" always_zap="1" pipzap="0" zap_wakeup="always" rename_repeat="1" conflict_detection="1" descramble="1" record_ecm="0">
</timer>
</timers>

Let's break this down a little bit. Start and end times are in epoch time. Use epoch converter. (My timezone = EST)
[Only registered and activated users can see links]

timer begin="1703116800" Epoch convert:, Next time Start event =
GMT: Thursday, December 21, 2023 12:00:00 AM
Your time zone: Wednesday, December 20, 2023 7:00:00 PM GMT-05:00
Relative: In 7 hours

timer end="1703118540" Epoch convert:, Next time End event =
GMT: Thursday, December 21, 2023 12:29:00 AM
Your time zone: Wednesday, December 20, 2023 7:29:00 PM GMT-05:00
Relative: In 7 hours

Here is a screenshot of your timer as seen in the receiver menu:
17928

Your timer is set for 1900 to 1929 when you actually want 1830 to 1900.
Carefully check and adjust your timer. Then test it tonight and se if it works. If you still have problems after resetting the timer to the proper time, then we will try something else.

[The_different]

Thanks its amazing..🌹🌹

[el bandido]

The source for the AVL6261 driver found in Edision Mio4K and Edision Mini 4K has been made available. A user named ocean posted the mods needed to show a signal below lock , which is useful for dish alignment and other things. This mod was done on the AVL6261 T2MI driver and the symbol rate was also lowered to 500, whereas before it was around 1500 for T2MI version.

I have not tested it enough to know the capabilities, but it seems to work OK. Is anyone interested in testing this feature?

Cozi on 103w. Signal shown is below Lock:
17934

[cyberham]

It appears TNAP5 no longer has available the plugin to add streaming URLs to our bouquets. This was a useful tool to provide access to favourite streams from a bouquet that I labelled "IPTV".

If this plugin is no longer available, is there some other way to accomplish this?

[el bandido]

The Exact Name of the plugin would help. Thanks.

[cyberham]

I just rebooted back to TNAP4.1 and it was called Add stream URL. Its description says "Add a streaming url to your channelist".

[el bandido]

Add stream URL Seems to be based on the old python 2 code. This plugin is no longer available until it is updated to python 3.

[MikeB]

I've done this manually, to an IPTV bouquet I created, and using Notepad++ (which is a free download) here is my template, but be aware I haven't used it for some time, so some/all of them may now be obsolete. You can manually build your own bouquet, (or edit your own) by changing the info below to match your info. This file is located in:


\\osmio4k\root\etc\enigma2\userbouquet.iptv_channe ls_tv_.tv

P.S. I'm still running TNAP 4.2




#NAME IPTV Channels (TV)
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links]
#DESCRIPTION American Horrors
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links] Classic Network
#DESCRIPTION American Classic Network
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links] Tv 4U
#DESCRIPTION Classic Tv 4U
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links] Retro TV
#DESCRIPTION 24/7 Retro TV
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links] Tv
#DESCRIPTION Horrified Tv
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links]'s At The Movies
#DESCRIPTION It's At The Movies
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links] 4U
#DESCRIPTION Movee 4U
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links]
#DESCRIPTION MovieMix
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links]
#DESCRIPTION Screamfest
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links]
#DESCRIPTION The Asylum
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links]
#DESCRIPTION YouToo America Backup
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links]
#DESCRIPTION YouToo America Prime
#SERVICE 4097:0:0:0:0:0:0:0:0:0:[Only registered and activated users can see links]
#DESCRIPTION Prive

[cyberham]

Thanks for the tip of just adding to my current IPTV bouquet. It works! I didn't use your template. Instead I ftped into my Mio+ and copied the existing IPTV bouquet to my PC. I followed the format in my existing bouquet and added a new stream. I ftped the revised file back to the Mio+, rebooted and now I have the new stream in my IPTV bouquet.

This is actually better than using the plugin since that required me to use the remote control to tediously key in a very long string. With this method, I just copy, paste, edit using my PC.

[el bandido]

There are or will be some updated Plugins for python 3. But some of the old plugins will be lost for good or until someone takes the time to convert them...

[stephan94]

The source for the AVL6261 driver found in Edision Mio4K and Edision Mini 4K has been made available. A user named ocean posted the mods needed to show a signal below lock , which is useful for dish alignment and other things. This mod was done on the AVL6261 T2MI driver and the symbol rate was also lowered to 500, whereas before it was around 1500 for T2MI version.
I have not tested it enough to know the capabilities, but it seems to work OK. Is anyone interested in testing this feature?

Hello el bandido
I only have the MIO4K (no +) is this the right Edision?
what do I have to do to be able to try this new possibility?
If you send me the modification and tell me where I should place it, I can of course try it out. (hoping it will be conclusive)

[cyberham]

There are or will be some updated Plugins for python 3. But some of the old plugins will be lost for good or until someone takes the time to convert them...
I have discovered a new plugin in TNAP5 that totally outdates Add stream URL. It is called Freearhey Plugin. It installs by default when you install TNAP5. This plugin allows you not only to watch almost any online stream but also to download complete folders of streaming links into its own bouquet using the plugin's Export command. Once in a bouquet, you can record any stream in the bouquet live or using a timer just as you would a satellite channel. Forget about Add stream URL. It's no longer required.

[Megatron817]

I have discovered a new plugin in TNAP5 that totally outdates Add stream URL. It is called Freearhey Plugin. It installs by default when you install TNAP5. This plugin allows you not only to watch almost any online stream but also to download complete folders of streaming links into its own bouquet using the plugin's Export command. Once in a bouquet, you can record any stream in the bouquet live or using a timer just as you would a satellite channel. Forget about Add stream URL. It's no longer required.
I downloded the addstreamurl ipk from OpenPli9r feed and it shows for OpenPLi Python3 core in the control notes so it will be fine with TNAP 5.
File attached.

[el bandido]

The source for the AVL6261 driver found in Edision Mio4K and Edision Mini 4K has been made available. A user named ocean posted the mods needed to show a signal below lock , which is useful for dish alignment and other things. This mod was done on the AVL6261 T2MI driver and the symbol rate was also lowered to 500, whereas before it was around 1500 for T2MI version.

I have not tested it enough to know the capabilities, but it seems to work OK. Is anyone interested in testing this feature?

Cozi on 103w. Signal shown is below Lock:
17934

Sort of surprised no one is interested in testing this. I will just keep it for myself....

I have never seen the T2MI driver scan like this. The lowest symbol rate I have found in blindscan so far is 500. The Stock T2MI driver will not blindscan below 1000 SR. Then you have the signal meter going below lock.


17938

17939

17940

17941

Nice!



Scan Report

< File created on Friday, December 29, 2023 at 01:42:18 >
< Satellite = 117.0W C-band Eutelsat 117 West A/B 117.1 W >
< Receiver = edision osmio4k >
< Enigma2 Image = Tnap 5 >
< Kernel Version = 5.15.0 >
< DVB Driver Date = 2021-11-03 >
< Blindscan Frequency Range = 3625 to 4800 MHz >
< Blindscan Symbol Rate Range = 1 to 60 Msps >
< Blindscan Only Free Channels or Services? = False >
< Tuner = Tuner A: Availink AVL6261 - TNAP MOD (DVB-S2X) >


< 'DVB-S 3720V / 27000 / AUTO' > Tp# 1
< (1)3720V SID 0x01 /> 1:0:1:1:1:0:97DC340:0:0:0:
< (2)3720V SID 0x02 /> 1:0:1:2:1:0:97DC340:0:0:0:
< (3)3720V SID 0x03 /> 1:0:1:3:1:0:97DC340:0:0:0:
< (4)3720V SID 0x04 /> 1:0:1:4:1:0:97DC340:0:0:0:
< (5)3720V SID 0x05 /> 1:0:1:5:1:0:97DC340:0:0:0:
< (6)3720V SID 0x06 /> 1:0:1:6:1:0:97DC340:0:0:0:
< (7)3720V SID 0x07 /> 1:0:1:7:1:0:97DC340:0:0:0:
< (8)3720V SID 0x08 /> 1:0:1:8:1:0:97DC340:0:0:0:
< (9)3720V SID 0x09 /> 1:0:1:9:1:0:97DC340:0:0:0:
< (10)3720V SID 0x0a /> 1:0:1:A:1:0:97DC340:0:0:0:
< (11)3720V SID 0x0b /> 1:0:1:B:1:0:97DC340:0:0:0:
< (12)3720V SID 0x0c /> 1:0:1:C:1:0:97DC340:0:0:0:
< (13)3720V SID 0x0d /> 1:0:1:D:1:0:97DC340:0:0:0:
< (14)3720V SID 0x0e /> 1:0:1:E:1:0:97DC340:0:0:0:
< (15)3720V SID 0x0f /> 1:0:1:F:1:0:97DC340:0:0:0:
< (16)3720V SID 0x10 /> 1:0:1:10:1:0:97DC340:0:0:0:

< 'DVB-S2 8PSK 3739H / 30002 / 3/4' > Tp# 2
< (17)CINE MEXICANO SD /> 1:0:1:9:65:1:97D0D78:0:0:0:
< (18)PLATINO 2 /> 1:0:1:B:65:1:97D0D78:0:0:0:
< (19)TELEFORMULA HD /> 1:0:1:C:65:1:97D0D78:0:0:0:
< (20)TVC DELAY MNMXDELAY /> 1:0:1:D:65:1:97D0D78:0:0:0:
< (21)VIDEOROLA SD /> 1:0:1:E:65:1:97D0D78:0:0:0:
< (22)EXCELSIORTV /> 1:0:1:F:65:1:97D0D78:0:0:0:
< (23)AMC /> 1:0:1:10:65:1:97D0D78:0:0:0:
< (24)MASCHIC /> 1:0:1:11:65:1:97D0D78:0:0:0:
< (25)GOURMET /> 1:0:1:12:65:1:97D0D78:0:0:0:
< (26)FILM&ARTS /> 1:0:1:13:65:1:97D0D78:0:0:0:
< (27)OCHO TV /> 1:0:1:14:65:1:97D0D78:0:0:0:
< (28)MEGACANAL /> 1:0:1:15:65:1:97D0D78:0:0:0:
< (29)PLATINO HD 117 /> 1:0:1:16:65:1:97D0D78:0:0:0:
< (30)TVC MNMX /> 1:0:1:17:65:1:97D0D78:0:0:0:
< (31)TVC DEPORTES HD /> 1:0:1:19:65:1:97D0D78:0:0:0:
< (32)PANICO HD 117 /> 1:0:1:1A:65:1:97D0D78:0:0:0:
< (33)MEGASPORTS SD /> 1:0:1:20:65:1:97D0D78:0:0:0:
< (34)NBA SD /> 1:0:1:21:65:1:97D0D78:0:0:0:
< (35)PASIONES SD /> 1:0:1:22:65:1:97D0D78:0:0:0:
< (36)HOLATV SD /> 1:0:1:23:65:1:97D0D78:0:0:0:
< (37)BEATBOX SD /> 1:0:1:24:65:1:97D0D78:0:0:0:
< (38)TVCDEP2 HD /> 1:0:1:25:65:1:97D0D78:0:0:0:

< 'DVB-S2 8PSK 3765H / 5200 / 3/4' > Tp# 3
< (39)Canal15 ILCE /> 1:0:19:2:1:1:97D7308:0:0:0:

< 'DVB-S2 8PSK 3771H / 5200 / 3/4' > Tp# 4
< (40)Canal Iberoamericano /> 1:0:19:3:1:1:97D8A78:0:0:0:

< 'DVB-S 3777H / 3600 / AUTO' > Tp# 5
< (41)TV-101 /> 1:0:1:101:1:1:97DA1E8:0:0:0:

< 'DVB-S2 8PSK 3782H / 4091 / 3/4' > Tp# 6
< (42)Pruebas /> 1:0:19:4:1:1:97DB570:0:0:0:

< 'DVB-S 3786V / 4000 / AUTO' > Tp# 7
< (43)TELECENTRO 13 /> 1:0:1:1:1:0:97DC510:0:0:0:

< 'DVB-S2 8PSK 3787H / 4091 / 3/4' > Tp# 8
< (44)Justicia TV /> 1:0:19:2:1:1:97DC8F8:0:0:0:

< 'DVB-S2 8PSK 3790V / 3080 / 3/4' > Tp# 9
< (45)TV-MAS /> 1:0:1:1:1:0:97DD4B0:0:0:0:

< 'DVB-S2 8PSK 3791H / 4091 / 3/4' > Tp# 10
< (46)Canal del Congreso /> 1:0:19:1:1:1:97DD898:0:0:0:

< 'DVB-S 3795V / 2244 / AUTO' > Tp# 11
< (47)RTU_ECUADOR /> 1:0:1:1:1000:2000:97DE838:0:0:0:
< (48)RTU_RADIO (Radio #1) /> 1:0:2:2:1000:2000:97DE838:0:0:0:

< 'DVB-S2 8PSK 3796H / 4091 / 3/4' > Tp# 12
< (49)Canal Once /> 1:0:19:3:1:1:97DEC20:0:0:0:

< 'DVB-S2 8PSK 3798V / 1660 / 3/5' > Tp# 13
< (50)RCG-01 /> 1:0:1:1:0:0:97DF3F0:0:0:0:

< 'DVB-S2 8PSK 3809V / 14999 / 3/4' > Tp# 14
< (51)XHDF /> 1:0:1:1:2711:0:97D9EE8:0:0:0:
< (52)XHIMT /> 1:0:1:2:2711:0:97D9EE8:0:0:0:
< (53)XHTVM /> 1:0:1:3:2711:0:97D9EE8:0:0:0:
< (54)XHDF /> 1:0:1:4:2711:0:97D9EE8:0:0:0:
< (55)XHTVM /> 1:0:1:5:2711:0:97D9EE8:0:0:0:
< (56)XHIMT /> 1:0:1:9:2711:0:97D9EE8:0:0:0:

< 'DVB-S2 32APSK 3819H / 34287 / AUTO MIS 0' > Tp# 15
< (57)NEWTEC E117WA PANAMERICA C06 --- UnKnown Service Type E: /> 1:0:E:67:66:1:97D45F8:0:0:0:
< (58) /> 1:0:0:1:66:1:97D45F8:0:0:0:

< 'DVB-S2 32APSK 3819H / 34287 / AUTO MIS 1' > Tp# 16

< 'DVB-S2 8PSK 3848H / 2800 / 5/6' > Tp# 17

< 'DVB-S2 8PSK 3851H / 2083 / 3/4' > Tp# 18
< (59)PVE5 Encoder /> 1:0:1:1:1:FFFF:97DC2F8:0:0:0:

< 'DVB-S2 8PSK 3857H / 4440 / 5/6' > Tp# 19
< (60)3857H SID 0x01 /> 1:0:1:1:1:0:97DDA68:0:0:0:

< 'DVB-S2 8PSK 3864H / 2500 / 5/6' > Tp# 20
< (61)MayaTV /> 1:0:1:1:1:1:97DF5C0:0:0:0:
< (62)Go TV /> 1:0:1:2:1:1:97DF5C0:0:0:0:
< (63)LTV /> 1:0:1:4:1:1:97DF5C0:0:0:0:
< (64)DIGITAL-1 /> 1:0:1:301:1:1:97DF5C0:0:0:0:

< 'DVB-S2 8PSK 3871V / 2875 / 5/6' > Tp# 21
< (65)Teleyucatan /> 1:0:1:1:1:FFFF:97D9118:0:0:0:

< 'DVB-S2 8PSK 3876H / 4167 / 3/4' > Tp# 22
< (66)3876H SID 0x01 /> 1:0:1:1:1:0:97D24A0:0:0:0:

< 'DVB-S2 8PSK 3886V / 3328 / 3/4' > Tp# 23
< (67)WWB /> 1:0:1:1:1:FFFF:97DCBB0:0:0:0:

< 'DVB-S 3887H / 2541 / AUTO' > Tp# 24
< (68)3887H SID 0x01 /> 1:0:1:1:0:0:97D4F98:0:0:0:

< 'DVB-S 3889V / 1667 / AUTO' > Tp# 25
< (69)3889V SID 0x01 /> 1:0:1:1:1:0:97DD768:0:0:0:

< 'DVB-S2 8PSK 3891H / 5000 / 3/4' > Tp# 26
< (70)AZTECA GUATE /> 1:0:1:1:3:1:97D5F38:0:0:0:
< (71)A+ GUATE /> 1:0:1:2:3:1:97D5F38:0:0:0:
< (72)UNION RADIO /> 1:0:1:3:3:1:97D5F38:0:0:0:

< 'DVB-S2 8PSK 3892V / 2416 / 3/5' > Tp# 27
< (73)TLAXCALA-TV /> 1:0:1:1:1:FFFF:97DE320:0:0:0:

< 'DVB-S2 8PSK 3899H / 7501 / 5/6' > Tp# 28
< (74)TVCUATRO4.1 /> 1:0:0:200:0:0:97D7E78:0:0:0:
< (75)TVCUATRO4.2 /> 1:0:0:201:0:0:97D7E78:0:0:0:
< (76)TVCUATRO4.3 /> 1:0:0:202:0:0:97D7E78:0:0:0:
< (77)TVCUATRO4.4 /> 1:0:0:300:0:0:97D7E78:0:0:0:

< 'DVB-S 3903V / 2200 / AUTO' > Tp# 29
< (78)LA VOZ DE MARIA /> 1:0:1:1:1:FFFF:97D8E18:0:0:0:

< 'DVB-S2 QPSK 3905H / 1600 / 3/4' > Tp# 30
< (79)3905H SID 0x01 /> 1:0:1:1:1:0:97D95E8:0:0:0:

< 'DVB-S2 QPSK 3907H / 2500 / AUTO' > Tp# 31
< (80)UNAH-UTV /> 1:0:1:1:0:0:97D9DB8:0:0:0:

< 'DVB-S 3908V / 6379 / AUTO' > Tp# 32
< (81)Teleantillas /> 1:0:1:2:0:1:97DA1A0:0:0:0:
< (82)Telesistema 11 /> 1:0:1:1:0:1:97DA1A0:0:0:0:
< (83)Coral 39 /> 1:0:1:3:0:1:97DA1A0:0:0:0:

< 'DVB-S2 QPSK 3910H / 813 / 5/6' > Tp# 33

< 'DVB-S2 8PSK 3916V / 4500 / 3/4' > Tp# 34
< (84)44.1 /> 1:0:1:1:1:1:97DC0E0:0:0:0:
< (85)44.2 /> 1:0:1:2:1:1:97DC0E0:0:0:0:

< 'DVB-S2 8PSK 3916H / 4000 / 3/4' > Tp# 35
< (86)3916H SID 0x01 /> 1:0:1:1:2328:0:97DC0E0:0:0:0:

< 'DVB-S2 8PSK 3923V / 7257 / 8/9' > Tp# 36
< (87)WMTVI CH 49.2 /> 1:0:1:32:F9C:1000:97DDC38:0:0:0:
< (88)AME CH47 /> 1:0:1:2F:F9C:1000:97DDC38:0:0:0:
< (89)NOTICIAS16 CH16 /> 1:0:1:10:F9C:1000:97DDC38:0:0:0:
< (90)LA VOZ DE MARIA /> 1:0:1:1E:F9C:1000:97DDC38:0:0:0:
< (91)NARANJA TV /> 1:0:1:5A:F9C:1000:97DDC38:0:0:0:
< (92)TELEMEDIOS 25.1 /> 1:0:1:19:F9C:1000:97DDC38:0:0:0:
< (93)SISTESUR CH 49.1 /> 1:0:1:31:F9C:1000:97DDC38:0:0:0:
< (94)SUPER CANAL 33.1 /> 1:0:1:21:F9C:1000:97DDC38:0:0:0:
< (95)RNN CH27 /> 1:0:1:1B:F9C:1000:97DDC38:0:0:0:
< (96)CINEVISION CH 19 /> 1:0:1:13:F9C:1000:97DDC38:0:0:0:
< (97)SU MUNDO TV /> 1:0:1:65:F9C:1000:97DDC38:0:0:0:
< (98)GET TV CH86 /> 1:0:1:56:F9C:1000:97DDC38:0:0:0:
< (99)CH DEL SOL CH6.1 /> 1:0:1:6:F9C:1000:97DDC38:0:0:0:

< 'DVB-S2 QPSK 3937V / 675 / 3/4' > Tp# 37
< (100)88.9 Noticias (Radio #2) /> 1:0:2:3E8:1:1:97D92E8:0:0:0:
< (101)La Comadre (Radio #3) /> 1:0:2:7D0:1:1:97D92E8:0:0:0:
< (102)Radio Disney (Radio #4) /> 1:0:2:BB8:1:1:97D92E8:0:0:0:
< (103)MIX (Radio #5) /> 1:0:2:FA0:1:1:97D92E8:0:0:0:
< (104)AMOR (Radio #6) /> 1:0:2:1388:1:1:97D92E8:0:0:0:
< (105)Radio Felicidad (Radio #7) /> 1:0:2:1770:1:1:97D92E8:0:0:0:

< 'DVB-S2 8PSK 3947V / 8332 / 5/6' > Tp# 38
< (106)Nuevo Mundo /> 1:0:1:13:1:0:97DB9F8:0:0:0:
< (107)EDN HEVC /> 1:0:1:16:1:0:97DB9F8:0:0:0:
< (108)Canal 11 /> 1:0:1:9:1:0:97DB9F8:0:0:0:
< (109)JBN /> 1:0:1:F:1:0:97DB9F8:0:0:0:
< (110)DTV /> 1:0:1:1:1:0:97DB9F8:0:0:0:
< (111)Une TV /> 1:0:1:11:1:0:97DB9F8:0:0:0:
< (112)Radios /> 1:0:1:A:1:0:97DB9F8:0:0:0:
< (113)Qhubo TV /> 1:0:1:2:1:0:97DB9F8:0:0:0:
< (114)VEA Canal /> 1:0:1:B:1:0:97DB9F8:0:0:0:
< (115)HCH /> 1:0:1:6:1:0:97DB9F8:0:0:0:
< (116)CCI Channel /> 1:0:1:E:1:0:97DB9F8:0:0:0:
< (117)RTV /> 1:0:1:10:1:0:97DB9F8:0:0:0:

< 'DVB-S2 8PSK 3949H / 15151 / 3/5' > Tp# 39
< (118)AzMundo /> 1:0:1:1:4D2:0:97D41C8:0:0:0:
< (119)AzCorazon /> 1:0:1:2:4D2:0:97D41C8:0:0:0:
< (120)AzClic /> 1:0:1:3:4D2:0:97D41C8:0:0:0:
< (121)Azcinema /> 1:0:1:4:4D2:0:97D41C8:0:0:0:
< (122)Azteca 1-1 Hr /> 1:0:1:5:4D2:0:97D41C8:0:0:0:
< (123)Azteca 1-2 Hrs /> 1:0:1:6:4D2:0:97D41C8:0:0:0:

< 'DVB-S2 8PSK 3958V / 4800 / 3/4' > Tp# 40
< (124)INTI NETWORK /> 1:0:19:1:5:0:97DE4F0:0:0:0:

< 'DVB-S2 8PSK 3963H / 2400 / 3/4' > Tp# 41
< (125)PANAMERICANA HD /> 1:0:1:1:1:FFFF:97D7878:0:0:0:
< (126)OneSeg /> 1:0:1:2:1:FFFF:97D7878:0:0:0:

< 'DVB-S2 8PSK 3966H / 1480 / 3/4' > Tp# 42
< (127)OROMAR TV A /> 1:0:1:1:1:1:97D8430:0:0:0:

< 'DVB-S2 8PSK 3967V / 7501 / 3/4' > Tp# 43
< (128)ECU - NAC /> 1:0:0:2:1:1:97D8818:0:0:0:
< (129)ECU - INTER /> 1:0:0:1:1:1:97D8818:0:0:0:

< 'DVB-S2 8PSK 3973H / 2916 / 3/4' > Tp# 44
< (130)GUATEVISION /> 1:0:1:1:1:1:97D9F88:0:0:0:
< (131)RCN (Radio #8) /> 1:0:2:29:1:1:97D9F88:0:0:0:

< 'DVB-S2 8PSK 3976H / 1667 / 3/4' > Tp# 45
< (132)3976H SID 0x01 /> 1:0:1:1:1:0:97DAB40:0:0:0:

< 'DVB-S2 8PSK 3978H / 833 / 5/6' > Tp# 46
< (133)W Radio (Radio #9) /> 1:0:2:3E8:1:1:97DB310:0:0:0:
< (134)W Deportes (Radio #10) /> 1:0:2:7D0:1:1:97DB310:0:0:0:
< (135)Los 40 (Radio #11) /> 1:0:2:BB8:1:1:97DB310:0:0:0:
< (136)La Ke Buena (Radio #12) /> 1:0:2:FA0:1:1:97DB310:0:0:0:
< (137)XEW AM (Radio #13) /> 1:0:2:1388:1:1:97DB310:0:0:0:
< (138)La Q (Radio #14) /> 1:0:2:1770:1:1:97DB310:0:0:0:

< 'DVB-S2 8PSK 3985V / 7500 / 5/6' > Tp# 47
< (139)RED C2HD /> 1:0:1:1:1:1:97DCE68:0:0:0:
< (140)RED C5HD /> 1:0:1:2:1:1:97DCE68:0:0:0:

< 'DVB-S2 8PSK 3996V / 4053 / 5/6' > Tp# 48
< (141)3996V SID 0x02 /> 1:0:1:2:0:0:97DF960:0:0:0:

< 'DVB-S2 QPSK 3999V / 1167 / 3/4' > Tp# 49

< 'DVB-S2 8PSK 4002V / 2250 / 3/4' > Tp# 50

< 'DVB-S2 8PSK 4012V / 9425 / 3/4' > Tp# 51
< (142)TVEA HD /> 1:0:1:A:5:0:97DB7E0:0:0:0:
< (143)TVEA SD /> 1:0:1:B:5:0:97DB7E0:0:0:0:
< (144)24 H /> 1:0:1:C:5:0:97DB7E0:0:0:0:
< (145)Star TVE HD /> 1:0:1:D:5:0:97DB7E0:0:0:0:
< (146)Clan HD /> 1:0:1:E:5:0:97DB7E0:0:0:0:
< (147)RNE 1 (Radio #15) /> 1:0:2:C9:5:0:97DB7E0:0:0:0:
< (148)REE (Radio #16) /> 1:0:2:CC:5:0:97DB7E0:0:0:0:

< 'DVB-S2 8PSK 4017H / 23198 / 5/6' > Tp# 52
< (149)CLARO SPORTS /> 1:0:1:1:1:1:97D4B68:0:0:0:
< (150)CONCERT CHANNEL /> 1:0:1:2:1:1:97D4B68:0:0:0:
< (151)CANAL CLARO /> 1:0:1:3:1:1:97D4B68:0:0:0:
< (152)CLARO CINEMA /> 1:0:1:4:1:1:97D4B68:0:0:0:
< (153)NUESTRA VISION /> 1:0:1:5:1:1:97D4B68:0:0:0:
< (154)CLARO SPORTS SERV 6 /> 1:0:1:6:1:1:97D4B68:0:0:0:
< (155)CLARO SPORTS SERV 7 /> 1:0:1:7:1:1:97D4B68:0:0:0:
< (156)CLARO SPORTS 2 /> 1:0:1:8:1:1:97D4B68:0:0:0:

< 'DVB-S 4032V / 15201 / AUTO' > Tp# 53
< (157)Telemicro Internacional HD /> 1:0:1:3:0:0:97D8600:0:0:0:
< (158)Telemicro /> 1:0:1:1:0:0:97D8600:0:0:0:
< (159)Digital 15 /> 1:0:1:2:0:0:97D8600:0:0:0:

< 'DVB-S2 8PSK 4050V / 13916 / 3/4' > Tp# 54
< (160)9 Cutlery Corner Network /> 1:0:1:9:0:0:97DCC50:0:0:0:
< (161)24 WPXS /> 1:0:1:18:0:0:97DCC50:0:0:0:
< (162)103 ATV P.R. /> 1:0:0:67:0:0:97DCC50:0:0:0:
< (163)105 ATV TAMPA /> 1:0:0:69:0:0:97DCC50:0:0:0:
< (164)107 Americans Auction Network /> 1:0:1:6B:0:0:97DCC50:0:0:0:
< (165)109 NRB /> 1:0:1:6D:0:0:97DCC50:0:0:0:
< (166)104 GEB /> 1:0:1:68:0:0:97DCC50:0:0:0:
< (167)101 DNJTV /> 1:0:1:65:0:0:97DCC50:0:0:0:
< (168)106 REVIVAL /> 1:0:1:6A:0:0:97DCC50:0:0:0:

< 'DVB-S2 8PSK 4060H / 30002 / 5/6' > Tp# 55
< (169)4060H SID 0x01 /> 1:0:1:1:1:0:97DF360:0:0:0:
< (170)4060H SID 0x02 /> 1:0:1:2:1:0:97DF360:0:0:0:
< (171)4060H SID 0x03 /> 1:0:1:3:1:0:97DF360:0:0:0:
< (172)4060H SID 0x04 /> 1:0:1:4:1:0:97DF360:0:0:0:
< (173)4060H SID 0x05 /> 1:0:1:5:1:0:97DF360:0:0:0:
< (174)4060H SID 0x06 /> 1:0:1:6:1:0:97DF360:0:0:0:
< (175)4060H SID 0x07 /> 1:0:1:7:1:0:97DF360:0:0:0:
< (176)4060H SID 0x08 /> 1:0:1:8:1:0:97DF360:0:0:0:
< (177)4060H SID 0x09 /> 1:0:1:9:1:0:97DF360:0:0:0:
< (178)4060H SID 0x0a /> 1:0:1:A:1:0:97DF360:0:0:0:

< 'DVB-S2 8PSK 4066V / 3100 / 2/3' > Tp# 56
< (179)MEXICANAL /> 1:0:19:1:1:1:97D8AD0:0:0:0:

< 'DVB-S2 8PSK 4073V / 3730 / 5/6' > Tp# 57
< (180)Teleformula /> 1:0:1:1:1:FFFF:97DA628:0:0:0:

< 'DVB-S2 8PSK 4076V / 2500 / 3/4' > Tp# 58
< (181)TELEUNIVERSO HD /> 1:0:1:1:1:1:97DB1E0:0:0:0:

< 'DVB-S2 8PSK 4084V / 11166 / 5/6' > Tp# 59
< (182)4084V SID 0x04 /> 1:0:1:4:382:0:97DD120:0:0:0:
< (183)4084V SID 0x06 /> 1:0:1:6:382:0:97DD120:0:0:0:
< (184)4084V SID 0x07 /> 1:0:1:7:382:0:97DD120:0:0:0:
< (185)4084V SID 0x08 /> 1:0:1:8:382:0:97DD120:0:0:0:
< (186)4084V SID 0x09 /> 1:0:1:9:382:0:97DD120:0:0:0:
< (187)4084V SID 0x0b /> 1:0:1:B:382:0:97DD120:0:0:0:
< (188)4084V SID 0x0c /> 1:0:1:C:382:0:97DD120:0:0:0:
< (189)4084V SID 0x0d /> 1:0:1:D:382:0:97DD120:0:0:0:
< (190)4084V SID 0x10 /> 1:0:1:10:382:0:97DD120:0:0:0:

< 'DVB-S2 8PSK 4094V / 6333 / 3/4' > Tp# 60
< (191)Hola TV HD /> 1:0:1:34:5:0:97DF830:0:0:0:
< (192)A3 Cine /> 1:0:1:19A:5:0:97DF830:0:0:0:
< (193)A3 Series NTSC /> 1:0:1:19B:5:0:97DF830:0:0:0:

< 'DVB-S2 8PSK 4100H / 30000 / 5/6' > Tp# 61
< (194)4100H SID 0x01 /> 1:0:1:1:2FF:0:97D8FA0:0:0:0:
< (195)4100H SID 0x02 /> 1:0:1:2:2FF:0:97D8FA0:0:0:0:
< (196)4100H SID 0x03 /> 1:0:1:3:2FF:0:97D8FA0:0:0:0:
< (197)4100H SID 0x04 /> 1:0:1:4:2FF:0:97D8FA0:0:0:0:
< (198)4100H SID 0x05 /> 1:0:1:5:2FF:0:97D8FA0:0:0:0:
< (199)4100H SID 0x06 /> 1:0:1:6:2FF:0:97D8FA0:0:0:0:
< (200)4100H SID 0x07 /> 1:0:1:7:2FF:0:97D8FA0:0:0:0:
< (201)4100H SID 0x08 /> 1:0:1:8:2FF:0:97D8FA0:0:0:0:
< (202)4100H SID 0x09 /> 1:0:1:9:2FF:0:97D8FA0:0:0:0:
< (203)4100H SID 0x0a /> 1:0:1:A:2FF:0:97D8FA0:0:0:0:

< 'DVB-S2 8PSK 4112V / 19668 / 5/6' > Tp# 62
< (204)Canal Once /> 1:0:1:C9:65:310:97DBE80:0:0:0:
< (205)AYM Sports /> 1:0:1:CB:65:310:97DBE80:0:0:0:
< (206)INTI /> 1:0:1:CA:65:310:97DBE80:0:0:0:
< (207)LAS USA /> 1:0:1:CC:65:310:97DBE80:0:0:0:
< (208)Kanal Drama USA /> 1:0:1:CD:65:310:97DBE80:0:0:0:
< (209)Telemicro /> 1:0:1:CE:65:310:97DBE80:0:0:0:
< (210)Canal+ Studio /> 1:0:1:D5:65:310:97DBE80:0:0:0:
< (211)Telemicro HD /> 1:0:1:C8:65:310:97DBE80:0:0:0:
< (212)Ecuavisa /> 1:0:1:CF:65:310:97DBE80:0:0:0:
< (213)CBTV /> 1:0:1:D0:65:310:97DBE80:0:0:0:
< (214)Kanal D /> 1:0:1:D1:65:310:97DBE80:0:0:0:
< (215)Canal 22 HD /> 1:0:1:D2:65:310:97DBE80:0:0:0:

< 'DVB-S2 8PSK 4139H / 30002 / 5/6' > Tp# 63
< (216)4139H SID 0x14 /> 1:0:1:14:139:0:97D27F8:0:0:0:
< (217)4139H SID 0x15 /> 1:0:1:15:139:0:97D27F8:0:0:0:
< (218)4139H SID 0x16 /> 1:0:1:16:139:0:97D27F8:0:0:0:
< (219)4139H SID 0x17 /> 1:0:1:17:139:0:97D27F8:0:0:0:
< (220)4139H SID 0x18 /> 1:0:1:18:139:0:97D27F8:0:0:0:
< (221)4139H SID 0x19 /> 1:0:1:19:139:0:97D27F8:0:0:0:
< (222)4139H SID 0x1a /> 1:0:1:1A:139:0:97D27F8:0:0:0:
< (223)4139H SID 0x1b /> 1:0:1:1B:139:0:97D27F8:0:0:0:
< (224)4139H SID 0x1c /> 1:0:1:1C:139:0:97D27F8:0:0:0:
< (225)4139H SID 0x1d /> 1:0:1:1D:139:0:97D27F8:0:0:0:

< 'DVB-S2 8PSK 4159V / 30000 / 5/6' > Tp# 64
< (226)Fox Sports VIRTUAL 3 /> 1:0:1:3:1:1:97DF618:0:0:0:
< (227)Fox Sports PREMIUM /> 1:0:1:4:1:1:97DF618:0:0:0:
< (228)EL FINANCIERO TV /> 1:0:1:5:1:1:97DF618:0:0:0:
< (229)Fox Sports HD /> 1:0:1:6:1:1:97DF618:0:0:0:
< (230)Fox Sports 2 HD /> 1:0:1:7:1:1:97DF618:0:0:0:
< (231)Fox Sports 3 HD /> 1:0:1:8:1:1:97DF618:0:0:0:

< 'DVB-S 4164H / 4400 / AUTO' > Tp# 65
< (232)Nacional /> 1:0:1:1:1:1:97D89A0:0:0:0:
< (233)Dif-1 /> 1:0:1:2:1:1:97D89A0:0:0:0:

< 'DVB-S2 8PSK 4183H / 25798 / 2/3' > Tp# 66
< (234)Milenio XHAW /> 1:0:16:1:69:5:97DD3D8:0:0:0:
< (235)Milenio MX /> 1:0:1:2:69:5:97DD3D8:0:0:0:
< (236)Teleritmo /> 1:0:19:3:69:5:97DD3D8:0:0:0:
< (237)Multimedios USA /> 1:0:19:4:69:5:97DD3D8:0:0:0:
< (238)Milenio USA /> 1:0:19:5:69:5:97DD3D8:0:0:0:
< (239)Feeds /> 1:0:16:6:69:5:97DD3D8:0:0:0:
< (240)Teleritmo XHAW /> 1:0:16:7:69:5:97DD3D8:0:0:0:
< (241)Seis Tres XHAW /> 1:0:16:8:69:5:97DD3D8:0:0:0:
< (242)Multimedios CDMX /> 1:0:19:9:69:5:97DD3D8:0:0:0:
< (243)Multimedios Costa Rica /> 1:0:19:A:69:5:97DD3D8:0:0:0:
< (244)Multimedios Plus /> 1:0:19:B:69:5:97DD3D8:0:0:0:
< (245)Multimedios MTY /> 1:0:19:C:69:5:97DD3D8:0:0:0:<

Blind Scan Time = 6 Min. 24 Sec.
245 Channels ( TV = 229 Radio = 16) 66 of 66 Transponders Scanned.

[eastof111]

EB, I think Stephan94 posted in #100 that he might want to test.

[el bandido]

Hello el bandido
I only have the MIO4K (no +) is this the right Edision?
what do I have to do to be able to try this new possibility?
If you send me the modification and tell me where I should place it, I can of course try it out. (hoping it will be conclusive)

Mio4k....Give me a little time. Thanks.

[cyberham]

Sort of surprised no one is interested in testing this....Then you have the signal meter going below lock....
I am very interested in the feature that shows a signal below lock and would be happy to test with my Mio+. My problem is my Ku dish is out of service until I relocate it in the yard. I can't do this until the weather improves. It's kind of cold and rains heavily almost everyday now...

[lme]

I'm wiling to test the new feature also on osmio4k+. My question is if it doesn't work/like, can the box be reset it to the old driver ?
Another question is if the new driver will work with the actual settings (inside the box) , or it needs to be altered ?
Probably the hardware (elevation, declination), doesn't have to be altered, but EB can confirm it as he already tested the new feature. If there are any implications from using the new driver, I would like to know before.
thx.

[el bandido]

I'm wiling to test the new feature also on osmio4k+. My question is if it doesn't work/like, can the box be reset it to the old driver ?
Another question is if the new driver will work with the actual settings (inside the box) , or it needs to be altered ?
Probably the hardware (elevation, declination), doesn't have to be altered, but EB can confirm it as he already tested the new feature. If there are any implications from using the new driver, I would like to know before.
thx.

Some changes to enigma2 and the avl6261.ko file are the only changes. You should not notice anything different. Check your pm or message box for image download information. Thanks.

[stephan94]

Hello ,
I've just tried the modified version of TNAP 5.
The improvements are fantastic.
_In Europe, we can receive the 26° East satellite on which there is a frequency range reserved for amateur radios.
The only major difficulty is that it is outside the usual frequencies
10490/ 10500 H and often with SR below 1000
Until now, it was impossible to receive these frequencies with a universal LNB.
_With this version it is possible to receive these frequencies without any problem.
With the Mio4k, it was previously impossible to receive SR below 1000.
Now it should be possible up to sr 500 (image sr 789).
_ a great novelty is also to be able to see the signal of a non-locked frequency.

I haven't tried blindscan yet.

[stephan94]

the new record ; a frequency with an sr of 500 has been locked (amateur radio)

[el bandido]

Nice!

Also. I must say you always have the latest in fashion. Please upload or post your CinoGriPLi skin! Thanks.

[cyberham]

....a great novelty is also to be able to see the signal of a non-locked frequency...
This would be a game changer to assist in dish orientation. I want this. If familiar with the satellite arc, I bet you could almost immediately get some kind of weak signal from a satellite even if elevation is not precisely aligned yet.

[eelstrebor]

For some reason the timer worked fine for a couple of days but the last 2 recordings were only 10 minutes out of 30 programmed.

timers.xml:
<?xml version="1.0" ?>
<timers>
<timer begin="1703979000" end="1703980740" serviceref="1:0:1:3:1:FF37:A2F1017:0:0:0:" repeated="127" name="ABC" description="ABC" afterevent="standby" eit="0" location="/media/usb/movie/" justplay="0" always_zap="1" pipzap="0" zap_wakeup="always" rename_repeat="1" conflict_detection="1" descramble="1" record_ecm="0">
</timer>
</timers>

[cyberham]

Today I was able to relocate my dish and my system is available again. I could test something with my Mio+ if required.

Also, it's been raised that TNAP5 Positioner Setup no longer displays tenths of a dB as previous images did. This makes it more difficult to manually position the dish precisely since you don't see the reading change until you gain or lose an entire 1 dB. Yet when you exit Positioner Setup, you can see the SNR reading with the tenths digit. Was this change intentional? Can it be changed back?

[el bandido]

17949

[el bandido]

For some reason the timer worked fine for a couple of days but the last 2 recordings were only 10 minutes out of 30 programmed.

timers.xml:
<?xml version="1.0" ?>
<timers>
<timer begin="1703979000" end="1703980740" serviceref="1:0:1:3:1:FF37:A2F1017:0:0:0:" repeated="127" name="ABC" description="ABC" afterevent="standby" eit="0" location="/media/usb/movie/" justplay="0" always_zap="1" pipzap="0" zap_wakeup="always" rename_repeat="1" conflict_detection="1" descramble="1" record_ecm="0">
</timer>
</timers>

Actually you are programming 29 minutes according to your timer information.
10 Minutes --Where? 10 minutes at the beginning, 10 minutes in the middle, 10 minutes at the end....etc.??
I ran this same recording for some days and did not have any problems. I doubt you find the TNAP 5 file structure to be at fault because no one else has mentioned a similar problem here or at the PLi forum which TNAP 5 is based on. Some detective type work will need to be done to sort of pinpoint where the problem is. The problem needs to be fixed, whether it is in your system or in the image itself.

[cyberham]

17949
17950

[MikeB]

17950

EB's screenprint is C-band, yours is KU. Maybe that's the difference in resolution?

[el bandido]

C and Ku band will display the same signal on Positioner setup. Anyway, it will be fixed in the next online update.

[lme]

Last question for this year: Will moded AVL6261 T2MI driver work on osmio mini4k too ?

[el bandido]

Last question for this year: Will moded AVL6261 T2MI driver work on osmio mini4k too ?

NO. Not this year.....
Because the enigma2 has not been modified to accept the signal-below-lock changes. Wait until next year.

[el bandido]

Last question for this year: Will moded AVL6261 T2MI driver work on osmio mini4k too ?

Do the following if you want it to work:
(1) Do an online update (Main menu--->Setup---> Software update)
(2) Go to Plugins and select Download Plugins (Main menu--->Plugins, then press green remote button)
(3) Navigate to extra plugins and pres the OK button on the remote to enter. Select and install enigma2-plugin-extra-t2mi-module-tnap-mod_5.15.0

[el bandido]

17950

Do the Exact same thing::
(1) Do an online update (Main menu--->Setup---> Software update)
(2) Go to Plugins and select Download Plugins (Main menu--->Plugins, then press green remote button)
(3) Navigate to extra plugins and pres the OK button on the remote to enter. Select and install enigma2-plugin-extra-t2mi-module-tnap-mod_5.15.0

Your test image has extended frequencies that we cannot use. These extended frequencies mess up the Ku blindscan. Follow the instructions above for best results.

[stephan94]

I think the version i tried was already with the plugin avl6261 T2mi 700mhz europe
because I didn't load any plugin to get all my positive results

[stephan94]

here the result of a blindscan which found a tranponder of sr 940 ( 23,5 East)

[el bandido]

I think the version i tried was already with the plugin avl6261 T2mi 700mhz europe
because I didn't load any plugin to get all my positive results

You were sent a test image.
Do an online update then load the plugin avl6261 T2mi 700mhz europe

[cyberham]

...Your test image has extended frequencies that we cannot use. These extended frequencies mess up the Ku blindscan. Follow the instructions above for best results.
Updated. This might explain the slow blind scans yesterday with the test image. Their results were accurate but slow. After updating just now, I blind scanned 87W Ku and it found every single transponder in just 3:43.

The Positioner Setup with 2 decimal places plus the non-locked SNR readout make the Edision a DX-hunter's delight now.
17953

[lme]

After today's update, tnap5-mod worked ok. turned the box off for few hours, and now i couldn't get a signal !!!
after i booted on regular tnap5 slot and booted back to tnap5-mod slot, it got signal !!!
now i scanned 121w-cband, but it did not find any active tps, despite the fact that 3 tps are showing signals (see pics from texas lottery ch):

17954179551795617957

[el bandido]

What is the information for the 3 transponders that have a signal and show channels? My MIO gets nothing on a blindscan of 121w. My Octagon SF8008 found One empty data transponder and nothing else. Which one of your receivers blindscans these transponders and channels successfully?

17958

[lme]

osmio4k+ stb, with tnap5, finds:
179591796017961

same stb, with tnap5-mod finds same tps, but does not lock on "MIS" tps:

179611796217963

the ch on tp 4151H is a feed, broadcasting at certain hours only.

[eelstrebor]

I ran into another issue with TNAP5. I have the Hauppauge 955Q driver installed but it won't show the scanned in TV stations. Images attached.
179731797117970

[cyberham]

...I have the Hauppauge 955Q driver installed but it won't show the scanned in TV stations...
FYI, I am using TNAP5 with the Hauppauge 950Q. Everything works correctly.

[stephan94]

here is the T2MI search result in blindscan with the plugin "avl6261-t2mi-700mhz-europe (5.15.0)".
everything works perfectly ( satellite 40° East)

[stephan94]

Example of a frequency too low to be locked.
At position 28.2 to the east of the UK beam, as expected, I'm no longer receiving it.
A measurement with the TBS 6983 card indicates that it is more than 3 dB short of being visible.
The MIO4K with the Ocean04 modification placed in the TNAP 5 image shows a dB value without frequency locking.

[lme]

I have regular tnap in slot 1, and tnap-mod in slot 3.
regular tnap in slot 1 was updated online, and since then it shows develop (?) in info screen.
also, shows a signal on any dead transponder (?):
1798117982

tnap-mod does not shows any signal on a dead transponder:
1798317984

[Megatron817]

I have regular tnap in slot 1, and tnap-mod in slot 3.
regular tnap in slot 1 was updated online, and since then it shows develop (?) in info screen.
also, shows a signal on any dead transponder (?):
1798117982

tnap-mod does not shows any signal on a dead transponder:
1798317984

Must be something in the online updates because I haven't updated TNAP5 online in a while. Shows last update 2023 10-10 on the about screen and the signal finder is working normal here.

[lme]

mine was updated 2023-12-31 !
on previous update (2023-10-10), were no problems.
I will advise to not update yet.

[el bandido]

This signal thingy should not be a big deal. Maybe some sort of explanation will help.

The AVL6261 driver was altered to show db signal below lock, Parts of enigma2 were also altered to show signal below lock.

What is happening to lme is simple: The previous signal is not being cleared by enigma2. This is happening because of the changes made to show signal below lock. A little bit of patience and this signal issue should be fixed.

[el bandido]

Tnap 5 currently has 4 different modules, drivers, or whatever else you want to call them for the avl6261 tuner or demodulator. Three of these drivers have T2MI enabled, and "play" well together. The problem is the Non-T2MI driver is constructed a bit different than the other three and does not appreciate the modifications that were made to allow signal below lock.

Modifications have been made that apparently will allow all 4 of these drivers to exist and not interfere with each other. A separate entry had to be added in the enigma2 coding for the non-T2MI driver so it will display signal correctly. Setting up the T2MI driver to show signal under lock will take a bit more effort from the user in order to see signal below lock. I will see if this solution for the signal being shown on a dead transponder can be added to an online update this weekend along with a short explanation of what changed and where.

[el bandido]

mine was updated 2023-12-31 !
on previous update (2023-10-10), were no problems.
I will advise to not update yet.

Do another online update and see if the signal db problem is fixed. Thanks.

[lme]

Do another online update and see if the signal db problem is fixed. Thanks.

Yes. It is fixed. Thx !
1798517986

Both images are listing: "Enigma version......xxxx-xx-xx (develop)".

[el bandido]

Why does this bother you? "Enigma version......xxxx-xx-xx (develop)". Would you like the wording or something else changed?

It shows Develop because the enigma2 is being built from what was originally the Develop branch. Maybe we should change it from Develop to Custom or something...

Thanks for verifying the problem is fixed!!!!

[lme]

Why does this bother you? "Enigma version......xxxx-xx-xx (develop)". Would you like the wording or something else changed?

It shows Develop because the enigma2 is being built from what was originally the Develop branch. Maybe we should change it from Develop to Custom or something...

Thanks for verifying the problem is fixed!!!!

No, it doesn't bother me at all. It may be confusing for others.
Maybe the name of the image in About screen, can be changed to "Tnap 5-MOD" like the Tuner is showing in the scanning screen. Just a suggestion !
About 121W/4151H, is active on weekends starting at 10-11 pm, eastern time:
1798717988

[el bandido]

Now for the bad part of the db signal "fix".

The No-T2MI avl6261 driver will display what ever the value was on the Last signal when there is No signal. In other words, you may have a signal showing 13db when no signal exists as shown earlier by lme. So we have a 2 way split:

(1) The enigma2 code has to be written so the signal has to be locked for the No-T2MI tuner to display snr in db correctly.
(2) The T2MI drivers do not seem to care if the signal is locked or not to display the signal correctly.

We have a splitter that is not used in Antenna settings called Force Legacy Signal Stats. The default for this is Off (false). So default will run normal and when Force Legacy Signal Stats is set to ON, then enigma2 will set the signal in db whether there is a lock or not, providing of course there is some sort of signal to set.

So the proper setting in Antenna setup is shown below if you want to display signal below lock on the T2MI drivers that can do this.

17989

[stephan94]

Hello,
after the last update i did a blindscan in C band where there is a lot of T2MI
after the blindscan which worked well i did a channel search of all transponders
suddenly green screen and error followed by new start, why? no idea here is the crash report

[cyberham]

I updated last night. I have lost the SNR reading when using Tuner C with a Hauppauge 950Q USB tuner.

17992

[el bandido]

Signal in db issues should be fixed with an online update.

17993


The Force legacy signal stats in Antenna setup should be set to OFF for normal operations.
The Force legacy signal stats in Antenna setup should be set to ON for showing signals levels below lock. This feature is only available with certain tuner modules.

Support is ending for TNAP 5. I age revisions and updates should be available in TNAP 5.1.

17994

[cyberham]

I updated. It works as you say. But SNR for OTA with Hauppauge 950Q doesn't work.

Added: Just found a new update. Trying it now....second update fixed OTA SNR issue. SNR now appears with Hauppauge. Unlocked signals for satellites still show SNR. Fantastic!

[lme]

TNAP5-MOD has been updated today, but for some reason it shows inconsistency on MIS type tp:
for illustration there are mis tps on 2 diff sats:
121W
1799517996

87W:
1799717998

Nothing like this is happening on regular TNAP5.

[el bandido]

TNAP5-MOD has been updated today, but for some reason it shows inconsistency on MIS type tp:
for illustration there are mis tps on 2 diff sats:
121W
1799517996

87W:
1799717998

Nothing like this is happening on regular TNAP5.

Apparently there is some confusion, so let's try to explain or clarify this stuff again.

Note: This only pertains to Edision Mio, MIO+, and Mini 4K receivers.

TNAP now has four(4) different avl6261 drivers that can be selected. (Two of these four drivers have been modified.)
TNAP now has two(2) signal settings in Antenna setup.
This means you have 8 possible combinations.

Drivers that have T2MI capability Do Not work on the multi-stream type transponder that is found on 121w c band. The only driver that works with that transponder is the Non-T2MI driver. The other 3 drivers Will Not Work on the 121w c band multi-stream transponder.

Force legacy signal stats in Antenna setup has to be set to OFF for the Non-T2MI driver to work properly.

Modifications were made in enigma2 to allow the 2 avl6261 drivers that are modified to show signal below lock.
Force legacy signal stats in Antenna setup has to be set to ON for the Modified T2MI drivers to work properly.

Here is a screenshot of 121w multi-stream tp using modded T2MI driver and Force legacy signal stats in Antenna setup set to ON:
17999
(Notice the missing AGC signal???)

Here is a screenshot of 121w multi-stream tp using Non-T2MI driver and Force legacy signal stats in Antenna setup set to OFF:
18000

Enigma2 Modifications to make all of this work were split in two.
Original Non-Modified Enigma2 code is accessed when Force legacy signal stats in Antenna setup set to OFF.
Modified Enigma2 code is accessed when Force legacy signal stats in Antenna setup set to ON.

The multi-stream transponder not working on T2MI drivers is the problem of Edision or the Manufacturer.
The multi-stream transponder not working on T2MI drivers Is Not the problem of the TNAP image.

[lme]

This still doesn't explain why mod version locks solid on multi-stream tps on 87W and not on 121w !

[el bandido]

Look at it a bit further then.....

What channel(s) are on the multi-stream transponders for 87w? Post your blindscan log that shows these transponders and we will investigate.

[lme]

Look at it a bit further then.....

What channel(s) are on the multi-stream transponders for 87w? Post your blindscan log that shows these transponders and we will investigate.

There are no channels on multi-stream tp.
here is the tp blindscan on normal tnap5:
18001

here is tp blindscan with mod version with legacy sig=off:
18002

here is tp blindscan with mod version with legacy sig=ON:
18003

[el bandido]

Put simply, the multi-stream transponders on 87w are not identical to the multi-streqam transponders on 121w. You will need to find someone with a Good satellite card or something more advanced than a fta receiver in the signal department to know the exact difference. You will probably find one of the satellite multi-stream transponder is acm/vcm, normal or short frame...etc while the multi-stream transponders on the other satellite are not. A satellite fta receiver such as the Edision MIO cannot show these details, so you have no way of knowing what the difference is. Having active channels on the transponder would help.

It is a known fact the T2MI and Non-T2MI avl6261 drivers behave differently and return different sets of transponders in blindscan. That is Why they are included in the image. Unfortunately, there is not a way today to make One of these drivers do everything. It is what it is....

Also, Blindscan is Blindscan. More or less a crapshoot. Sometimes you can blindscan a satellite three times and get three different results. Other times, you can blindscan a satellite 5 times and get almost identical results each time. Some drivers and enigma2 images may blindscan better than others. You just have to find what works best for you and use it. This is not likely to change anytime soon.

[stephan94]

Hello
With the latest version of TNAP 5 image and thanks to Ocean04's modifications
we can see since the end of 2023 the signals of the transponders which are not locked.
Here is a comparison of the results on the 30.5 East satellite (Arabsat) from Crazyscan and mio4K.
It's very comparable.

[stephan94]

and even with very weak signals the result is decent

[cyberham]

I have a crash log for TNAP5. TNAP5 will repeatedly crash any time I select the BVN transponder at 12147 H 3600 on 117W Ku. I tried rescanning the tp using Signal Finder. The Finder sees the tp indicating by its name that it has been updated to FEC 5/6. The Service List reports it sees the tp. But when I scan, TNAP5 again crashes.

Crash log is attached.

18041

Added today: I did a fresh blind scan using Clear before scan switch. BVN can now be selected without crashing the system. Problem symptom is gone.

[el bandido]

TNAP5 Online updates are available.
The signal below lock has been modified and now has its own setting in Antenna setup as shown below.
18046

[stephan94]

hello el bandido
your last screenshot shows version 5.1.
I looked in the flash image of my MIO 4K and this version is not there. Is this normal?
I do have the latest update
or have I missed a step?

[el bandido]

TNAP 5.1 Is only running in the SF8008 Supreme. It is taking time to update/build TNAP 5.1 for the other receivers. Maybe a week or two.

[Fearless]

I don't play a lot with new images. Only done this about 6 times. But I have a MIO 4K plus I don't use very often and wanted to load TNAP 5. I've loaded TNAP 5 and TNAP 5test successfully in slots with or without backup and setting up the tuners is no problem but when scanning I have the same issue on all installs. When the scan is complete and you press the green button to accept the scan results I get a green screen "software error" and it reboots. No channels are saved. Now when scanning from the signal finder it saves the channels but any channel selected gives a green screen "software error" and reboot. Channels are saved but if selected after a reboot it green screens and reboots. I've deleted the installs and tried different slots but still the same results. There is a early TNAP 3.2 in slot one and OpenViX in slot three and they appear unaffected by the problems with the TNAP 5 installs.

[Fearless]

Well I read this thread to see if anyone else had this issue but nothing reported like that. I did however see a couple of suggestions I tried. So I loaded TNAP 5 Test again and rain the updates. 44 updates later it became TNAP 5 (no test) and the green screens are no more. :)

[cyberham]

I have a Mio+ running TNAP5 updated to Feb. 8, 2024. There is a transponder on 97W Ku called WEDO Big Stories. The transponder details are as below. Lately, I can no longer watch it; only a black screen appears with no audio. SNR is 11.2 dB. The transponder is DVB-S2 2/3 8PSK and is not encrypted. So carrier lock level is 6.6 dB. Yet, if I play it via PotPlayer or via my smartphone then I can view the channel normally. Does anybody understand why this is so?

18078

[eastof111]

Working fine on the sf8008 supreme. Since the service recently went on the air, could be they are still sorting out transmission errors.

18079

[cyberham]

My Mio+ is also receiving it well. It just isn't displaying anymore on my TV connected via HDMI connection. This same symptom is being experienced by others using Edision.

18080

[el bandido]

There is not any transponder information in this. Only channel or Service information.

I have a Mio+ running TNAP5 updated to Feb. 8, 2024. There is a transponder on 97W Ku called WEDO Big Stories. The transponder details are as below. Lately, I can no longer watch it; only a black screen appears with no audio. SNR is 11.2 dB. The transponder is DVB-S2 2/3 8PSK and is not encrypted. So carrier lock level is 6.6 dB. Yet, if I play it via PotPlayer or via my smartphone then I can view the channel normally. Does anybody understand why this is so?

18078

Anyway, If you will look under AVC in your attached, you will see it is 1920 X 1080 -25i.

The 25i part is unusual and most likely, your television cannot handle it. Running the service through the player probably converts it to something else. This explains why can view it using the player.

[el bandido]

I stand Corrected!
The TV is not the problem. The Edision cannot play it.

[eastof111]

I went back to the channel and watched it for a longer time period. Seems that every few minutes there will be a slight glitch in the audio and video display. Maybe it's affecting the sf8008 too?

[cyberham]

...If you will look under AVC in your attached, you will see it is 1920 X 1080 -25i.

The 25i part is unusual and most likely, your television cannot handle it. Running the service through the player probably converts it to something else. This explains why can view it using the player.
This is a new issue. The Edision used to play it for a couple of months before a week or so ago. Can this be fixed? Reportedly, Azbox and Amiko can play the transponder.

[el bandido]

What changed? I have no idea as I have not watched this channel. My best guess as to why it does not work has already been shown. You can check other images, but I doubt it is an enigma2 problem. Most likely, it will take Edision to fix it. Look and see what you can find out about it. See if anyone knows if the video format changed. Other than that, It looks like a normal satellite service.

Edision is Broadcom where the SF8008 receivers are Hisilicon. So the two are not the same.

[cyberham]

It's reported the change was going from 1024 x 576 to 1920 x 1080. It was 25fps and 50Hz in both cases.

[el bandido]

The salesman/admin at TVROSAT claims the Edision works fine using OpenATV on WEDO Big Stories. This information is False --or at least it is on My Edision.

[Only registered and activated users can see links]

[Megatron817]

Big stories kinda plays on the Mio+ if you use time shift. Let it stay paused for a minute then it will play some or a little while before it stops. Video quality is not so great.

[EnoSat]

What changed? I have no idea as I have not watched this channel. My best guess as to why it does not work has already been shown. You can check other images, but I doubt it is an enigma2 problem. Most likely, it will take Edision to fix it. Look and see what you can find out about it. See if anyone knows if the video format changed. Other than that, It looks like a normal satellite service.

19:42:18.3644 [eDVBServicePlay] have 1 video stream(s) (03e8), and 4 audio stream(s) (03e9, 03ea, 03eb, 03ec), and the pcr pid is 03e9, and the text pid is ffffffff
19:42:18.3656 [eDVBServicePlay] Setting audio delay: setAC3Delay, 0 + 0
19:42:18.3658 [eDVBServicePlay] Setting audio delay: setPCMDelay, 0 + 0
19:42:18.3659 [eTSMPEGDecoder] decoder state: play, vpid=03e8, apid=03e9
19:42:18.3660 [eDVBVideo0] VIDEO_SLOWMOTION 0 ok19:42:18.3690 [eDVBVideo0] VIDEO_FAST_FORWARD 0 ok19:42:18.3735 [eDVBVideo0] VIDEO_CONTINUE ok19:42:18.3736 [eDVBAudio0] AUDIO_CONTINUE ok19:42:18.3787 [eDVBCIInterfaces] gotPMT
19:42:18.3793 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
19:42:18.3796 [eDVBSectionReader] DMX_SET_FILTER pid=5270
19:42:18.4620 [eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 1920x1080 aspect 3
19:42:18.4680 [eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps
19:42:18.4685 [eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
19:42:18.4687 [eDVBVideo0] VIDEO_GET_EVENT GAMMA_CHANGED 0
19:42:18.5638 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
19:42:18.5641 [eDVBSectionReader] DMX_SET_FILTER pid=103
19:42:18.6724 [Dish] tuned, closing...
19:42:18.7384 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
19:42:18.7388 [eDVBSectionReader] DMX_SET_FILTER pid=104
19:42:18.8630 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
19:42:18.8634 [eDVBSectionReader] DMX_SET_FILTER pid=105
19:42:19.0133 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
19:42:19.0137 [eDVBSectionReader] DMX_SET_FILTER pid=106
19:42:19.1503 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
19:42:19.1507 [eDVBSectionReader] DMX_SET_FILTER pid=107
19:42:19.1694 [eDVBServicePlay] time shift not enough diskspace for timeshift! (less than 1GB)
19:42:19.1886 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
19:42:19.1889 [eDVBSectionReader] DMX_SET_FILTER pid=108
19:42:19.4139 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
19:42:19.4142 [eDVBSectionReader] DMX_SET_FILTER pid=109
19:42:19.5005 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
19:42:19.5008 [eDVBSectionReader] DMX_SET_FILTER pid=110
19:42:19.5880 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
19:42:19.5884 [eDVBSectionReader] DMX_SET_FILTER pid=5270
19:42:20.0506 [eEPGChannelData] start reading events(1709253740)
19:42:20.0507 [eDVBSectionReader] DMX_SET_FILTER pid=3842
19:42:20.0509 [eDVBSectionReader] DMX_SET_FILTER pid=3003
19:42:20.0512 [eDVBSectionReader] DMX_SET_FILTER pid=18
19:42:20.0514 [eDVBSectionReader] DMX_SET_FILTER pid=18
19:42:20.0518 [eDVBSectionReader] DMX_SET_FILTER pid=18
19:42:20.0522 [eDVBSectionReader] DMX_SET_FILTER pid=5000
19:42:20.0524 [eDVBSectionReader] DMX_SET_FILTER pid=5000
19:42:20.0528 [eEPGChannelData] abort non avail OpenTV EIT reading
19:42:20.0529 [eDVBSectionReader] DMX_SET_FILTER pid=57
19:42:20.0530 [eDVBServicePMTHandler] sdt update done

19:43:15.1244 [eDVBCAService] free slot 0 demux 0 for service 1:0:1:3E9:1:1:A462F98:0:0:0:
19:43:15.1245 [eDVBCAService] free service 1:0:1:3E9:1:1:A462F98:0:0:0:
19:43:15.1278 [eDVBServicePlay] time shift not enough diskspace for timeshift! (less than 1GB)
19:43:15.1280 [eDVBServicePlay] time shift not enough diskspace for timeshift! (less than 1GB)
19:43:15.1284 [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
19:43:15.1285 [eDVBPCR0] DEMUX_STOP ok19:43:15.1286 [eDVBPCR0] destroy
19:43:15.1286 [eDVBVideo0] DEMUX_STOP ok19:43:15.1294 [eDVBVideo0] VIDEO_STOP ok19:43:15.1294 [eDVBVideo0] destroy
19:43:15.1295 [eDVBAudio0] AUDIO_STOP ok19:43:15.1394 [eDVBAudio0] DEMUX_STOP ok19:43:15.1395 [eDVBAudio0] AUDIO_CONTINUE ok19:43:15.1396 [eDVBAudio0] destroy
cleaning up

[WilburSmith]

Thank you Megatron817 for posting this! It worked for me and I can see Kia again :hugs:!

[WilburSmith]

Forgot to mention that I ran a debug on my edison and got these few lines:

19:43:15.1284 [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
19:43:15.1285 [eDVBPCR0] DEMUX_STOP ok19:43:15.1286 [eDVBPCR0] destroy
19:43:15.1286 [eDVBVideo0] DEMUX_STOP ok19:43:15.1294 [eDVBVideo0] VIDEO_STOP ok19:43:15.1294 [eDVBVideo0] destroy

[el bandido]

Forgot to mention that I ran a debug on my edison and got these few lines:

19:43:15.1284 [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
19:43:15.1285 [eDVBPCR0] DEMUX_STOP ok19:43:15.1286 [eDVBPCR0] destroy
19:43:15.1286 [eDVBVideo0] DEMUX_STOP ok19:43:15.1294 [eDVBVideo0] VIDEO_STOP ok19:43:15.1294 [eDVBVideo0] destroy

What problem or error in the operations of the receiver is shown here?

[WilburSmith]

I was trying to watch we do stories

[el bandido]

Unfortunately, there is not anything that can be done to fix WEDO Big Stories in the enigma2 image build right now. Some enigma2 receivers have no issue with this channel, but others do. Most likely, the manufacturer of the fta receiver will have to fix this.

Another version of Avalink firmware might fix WEDO Big Stories. Maybe someone will try that.

[cyberham]

Big stories kinda plays on the Mio+ if you use time shift. Let it stay paused for a minute then it will play some or a little while before it stops. Video quality is not so great.
This is a good simple workaround. It continued to play well until I changed channels forcing timeshift to stop. Video quality was the same as originally broadcast (about 2 Mbps). Recording on the Edision also results in a file that can be played on the Edision without using any external apps.

[WilburSmith]

As a noob this will be an interesting thread to follow and see how the community counters this challenge through knowledge sharing and friendliness of others.

[el bandido]

Signal in db, Transponder lock/unlock, and lnb power will be added to the scan reports for the Octagon SF8008. It is unknown if the same features will be added for the Edision 4K receivers because the different drivers return different results.

Showing the signal in db for the scanned transponders helps to get a view of how the dish system is working. Knowing if a transponder failed to scan channels because it was unlocked is also useful. Shown below is a screencap of the SF8008 Supreme.

18090

[stephan94]

I don't have the 8008 (supreme or other)
I read in several European forums that the supreme (unlike the normal 8008 which reads up to SR 250) does not read for the moment sr below SR 940. For many radios this is not ideal.

[cyberham]

WEDO Big Stories channel is back to working normally. The differences I can see:

Video:
Was 25i. Now 25p.

Provider:
Was Amtecco. Now Amagi.

Audio:
Was AAC undefined. Now AAC English.

[el bandido]

My guess is the 25i was the problem.

[WilburSmith]

I would like to second this finding!

[cyberham]

The Mood Music channels are now in parallel on 101W at 12000 V 20000. Presumably this is due to them leaving 103W in the future. How can I see them on 101W?

[el bandido]

Signal in db and some other information such as whether the transponder is in a Locked state have been added to the scan reports. I find this information useful for several different things, and maybe others will find it useful for something too. The supported MIO receivers do not do a good job returning signal in db during a scan as compared to the SF8008 series, but the MIO's do return useful information. Try it for yourself and see.

To get this feature in TNAP5, perform an online update. This will most likely be the last update for TNAP5.

18119

[cyberham]

The new function works fine. More information is always welcomed.

For example:
The new Horizons 4 at 127W Ku blind scan never scans anything in. But now I can at least see something about what's going on.

18120

[cyberham]

I am trying out my 1-metre dish on C-band using a Titanium C1PLL LNBF. When blind scanning 105W, I found a transponder at 4117 V 960. I receive it at up to 5.8 dB. Several times when I scanned it, I got a green crash screen. Other tps on 3991 V 5833 and 4025 V 5000 scanned in normally. I'm wondering why the green screen. See attached.

[el bandido]

See if an online update fixes the crash.

[cyberham]

I've scanned the tp in question after updating online. The tp locks solidly now at 6.7 dB, nothing scans in but the box doesn't crash. So that sounds like it's fixed.

[ArloG]

Saw your post and pics on satguys. My first thoughts were wow!, he's really pressing it with a 1m dish.
Don't know if you have a bigger dish to compare but I know on mine trying to scan transponders on the fringes of footprints. Getting a lock sometimes requires a few blindscans in a row.
And even then sometimes the tuner kind of craps out. That's using a mio4k. Meaning further blindscan tries has me rebooting the receiver. It just refuses to scan and just sits there.
I was reading other sites pertaining to c band on 1 meter dishes. 5.8 dB here is marginal. I do get some inconsistent locks and frequent broken video and audio. The picture is kind of like it has green panels. Like a Rubik's Cube.
By chance have you removed the scalar entirely and tried to get a signal? You mentioned that you have moved that and the lnbf all over to get the best signal.
My thoughts are that dishes that small are always for ku and ka band reception. And cast in place scalars on those are quite small.
Ku band on my sidecar lnbf on the big dish with down to something like 5 dB locks signal just fine and no issues at all. C band with 8-9 dB is spotty at least.
I wonder what would happen if a person had another small dish or two and cut them with a jig saw into petals to add to the O.D. with angle brackets of a small to dish to make it appear bigger.

[cyberham]

...So that sounds like it's fixed.
I notice that the multi-satellite scan function is not working now after the update. I occasionally use this function to quickly check all C-band satellites in the arc. I prefer using single-satellite blind scan but this takes longer.

[cyberham]

Saw your post and pics on satguys....
The visual quality received depends on type of signal (DVB-S / DVB-S2), modulation (QPSK, 8PSK, 16APSK...etc.) and FEC value. As long as you receive at least at or near the C/N lock value for a particular tp then visual quality will be fine. On C, minimum C/N lock values can vary from 2.7 dB up to 11 dB and higher. These can be seen on Lyngsat or just be looked up on charts: [Only registered and activated users can see links] CNR%2C_CN_for_DVB_S2_system.html

Happy to carry on discussing your comments where I posted my 1m C-band scan report.

[el bandido]

The signal lock requirements are the same for Ku and C band (see Link below). It all depends on the modulation type and the fec.

[Only registered and activated users can see links] _CN_for_DVB_S2_system.html

Mis-matching parts or using parts such as lnb(f)'s that are not designed for the satellite dish may cause other problems including picture break-ups, pixelation and artifacts even when the signal is above lock. There is a lot more channels and programming on Ku band than most people realize. But you won't be able to receive much unless the dish system is designed for Ku band and the proper Ku band parts are used.

[ArloG]

Hey.It's an experimenters world here. Package deals like days of old are long gone for most fta guys. A 1 meter dish for c band? I'd never even believe it could be done and honestly never even gave it a thought. But. I read too much. Then again. Look at Winehouse. Maybe she should have said yes, yes yes.
So good job Cyberski!
As for the whole signal lock thing. Nah. Not really. At least for the mio receiver. Same mod., sr, fec. Unless it's the convoluted hard coded software. Using the receiver's signal meter I can pretty much say forget about it if c band signal isn't at least around what I stated above. No lie. Ku band.....it locks and give a good stable picture at way lower displayed signal levels.
Look at it this way. Strings and rulers and calculations told me that my scalar "had" to "be right here". Like a good soldier I complied. Signal sucked no matter how much I tweaked the lnbf and dish geometry (prime focus, polar mount). "Under Illumination" was a sure thing. Moved the scalar back a touch and did it again. Signal eventually floored the signal meter.
Reading is good. Yeah. Being able to do what you read (in science) is good too. That didn't get us on the moon though.

[el bandido]

Just because strings, rulers, calculations and whatever else did not apply or work on a homeowner dish that is 30- 40 years old does not meant that the calculations are bogus! Calculations for finding where to place things on a satellite dish antenna are highly accurate, But the calculations are no better than what they are being used on. A satellite antenna will change as it ages, and for antennas exposed to the outside elements, the changes that come with age are not good.

Calculations where a DVB-S/S2 signal will lock or unlock is also known and again are highly accurate, depending upon the piece of equipment providing the measurements. No FTA satellite receiver is going to be highly accurate at anything when it comes to signal measurements. Some work by the manufacturer was done on the Edision 4K receivers to ensure that we got a reasonable idea of signal measurements. But there is only so much you can do with a piece of equipment that was assembled for a few dollars in parts.

Shown below is a You Tube video that demonstrates the MIO 4K receiver displaying a satellite signal below lock. The transponders used for this video are "detuned", with one channel on 91 west C band playing without errors at 2-3 db snr. Another channel on 117w C band is shown playing at around 4 db snr without errors. The DVB-S2 3/4 fec transponder in the video locks at around 4 db while the 8psk 5/6 fec transponder locks at around 10 db. The Edision MIO 4K lock values for these transponders are real close to what is calculated. Not bad at all for a cheap FTA receiver.



[Only registered and activated users can see links]

[el bandido]

I notice that the multi-satellite scan function is not working now after the update. I occasionally use this function to quickly check all C-band satellites in the arc. I prefer using single-satellite blind scan but this takes longer.

The multi-satellite scan function located under Manual scan should work. Do an online update again and recheck.

Today's online update also sends the correct bootlogo and corrects the drivers being listed twice in feeds.

[stephan94]

Today's online update also sends the correct bootlogo and corrects the drivers being listed twice in feeds.

Thank you very much, it's perfect now.:bigthumbup:

[cyberham]

The multi-satellite scan function located under Manual scan should work. Do an online update again and recheck.

Today's online update also sends the correct bootlogo and corrects the drivers being listed twice in feeds.
I updated. The multi-satellite scan is working.

I notice something interesting. This occurred with new TNAP 5.1 even before today's update. If I use Positioner Setup to fine tune the dish with diseqc commands, save and exit, then if I change channels while still on the same satellite, the box crashes every time. My workaround is to exit Positioner Setup then change to an adjacent satellite. If I then move back to original satellite, the box doesn't crash.

[el bandido]

Need to see the crash file as this should not happen!
Thanks.

[cyberham]

It stopped crashing. Maybe it only occurred on the first time I did each satellite. I will monitor.

[cyberham]

Need to see the crash file as this should not happen!
Thanks.
This just happened so I grabbed the crash log.
18127

[el bandido]

This just happened so I grabbed the crash log.
18127

[eServiceMP3] Gstreamer error: Could not establish connection to server. (5) from source
[eServiceMP3] Gstreamer error: Internal data stream error. (1) from source
[eServiceMP3] Gstreamer error: Stream doesn't contain enough data. (4) from typefindelement2


Can you post your channel file named lamedb? This file is located in /etc/enigma2.
Thanks.

[cyberham]

[B]...Can you post your channel file named lamedb? This file is located in /etc/enigma2....
Recently when changing between images, I did ftp my backed-up lamedb and other user files to the Mio+. I just didn't want to lose all my C-band scans, etc. I bet you're going to say my lamedb is corrupted in some way. I always dislike doing this since it seems this causes trouble.

I just updated my Mio+ online, then I grabbed a copy of my current lamedb (attached). I renamed it .txt just so I could transfer it.

[el bandido]

Updates are online that should solve most of the signal finder errors. These errors or complaints did not seem to bother anything, so I doubt fixing them helped. The Gstreamer error is what I find interesting. Why is a "Could not establish connection to server" error in there unless some type of ip issue is present? Anyway, do an online update and see what happens.

[cyberham]

...Anyway, do an online update and see what happens.
Same symptom even after I updated. After exiting Positioner Setup, the display shows as attached. Note how Tuners A and C letters are not green. The Mio+ has always done this. So I must press the Up key to change channels to make the Mio+ "see" the channel even when there is only one channel scanned in such as on 129W Ku. But when I do this, the box crashes. If I press the Right or Left key to change satellites, then go back to the satellite, the box doesn't crash. This simple workaround isn't so bad at least until TNAP5.1 comes along when I won't restore user files; just create them fresh at that time maybe with exception of user bouquets which are a lot of work to re-create.

18135

[el bandido]

Look at the bottom of the lamedb. That don't look right at alll.....

18136

[el bandido]

Do you select yes and press the ok button when exiting Positioner setup?

18137

[cyberham]

Do you select yes and press the ok button when exiting Positioner setup?...
As a matter of fact, I see that I don't. I press EXIT EXIT. If I press EXIT YES, then Tuner A is green and issue doesn't occur. If I press EXIT NO, then Tuner A is not green and problem occurs. Operator error perhaps.

[el bandido]

OK
Most likely, your problems are a combination of the way you exit Positioner setup along with a lamedb file that has some corruption in it.

[cyberham]

Do we know when TNAP5.1 will be available in some form? My system is working well. So I'm looking for something to do that will mess it up. I may get out my old Openbox S9 and hook it up just to see how it handles the current FTA transponders.

[el bandido]

Probably some days or a week or two before 5.1 is finished. Still adding a few things.

18143

[lme]

After the last online update (2024-3-24), today I was fine tuning my signals acrros the arc.
After few of this fine tuning and position saved, the box becomes sluggish: takes time to respond to the commands, even
from the main menu when trying to restart:

1814418145

..and there is the spinner, like the box is confused.

[el bandido]

Usually the spinner means that something or something(s) are running that are using enough resources to cause problems. This is why it is sluggish. This will be hard to fix without knowing what is running that caused this. What exactly were you using to do the tuning? Positioner setup?, Signal finder? Or ???. Does the box work normal now that it is rebooted?

[lme]

Usually the spinner means that something or something(s) are running that are using enough resources to cause problems. This is why it is sluggish. This will be hard to fix without knowing what is running that caused this. What exactly were you using to do the tuning? Positioner setup?, Signal finder? Or ???. Does the box work normal now that it is rebooted?

The only menu to do a fine tuning is positioner setup. After the reboot is working at normal speed, but after few tunings it's sluggish again. Do not remember having this issue before. And is not happening on other images (vix, openbh, etc) !

[el bandido]

You may also fine tune a c band actuator using Signal finder. The files for Signal finder recently changed. The files for Positioner setup have not been changed for months in TNAP 5.

I just fine - tuned back to back 89w, 91w, and 105w using Autofocus in Positioner setup. The debug log shows an error in Positioner setup, but nothing that should cause the spinner to activate. You usually only see the spinner when lots of resources are being used. Seems you have something running besides Positioner setup.

[el bandido]

The coding for Positioner setup needs updating. Shown below in the screencap, the red is the correct code, and the green code is what is in TNAP5. Probably the best thing to do here is to forget about updating this in TNAP 5, and focus instead on TNAP 5.1. Your spinner and lagging problem may still exist, even if this code is corrected as you may have something running. You can check and monitor what is running by opening a terminal and typing top.

18146


Here is what the top command in terminal looks like with Positioner setup running Autofocus.
18147

[Megatron817]

Tnap 5 crash when doing a new manual scan of ATSC channels.

[lme]

You may also fine tune a c band actuator using Signal finder. The files for Signal finder recently changed. The files for Positioner setup have not been changed for months in TNAP 5.

I just fine - tuned back to back 89w, 91w, and 105w using Autofocus in Positioner setup. The debug log shows an error in Positioner setup, but nothing that should cause the spinner to activate. You usually only see the spinner when lots of resources are being used. Seems you have something running besides Positioner setup.

I do not use Autofocus. You try to use " Fine movement" option. That is what I use, and nothing else is is running besides Fine movement. After few Fine movements, the box becomes sluggish in every use: when browsing the channel list or any other list in the menus.

[cyberham]

Tnap 5 crash when doing a new manual scan of ATSC channels.
This happened to me one time a couple weeks ago. I don't use the feature since, if it's like other ATSC scan functions in TVs, it will delete channels not found on a given new scan. My channels are distant and not always receivable so I don't want to lose them.

[cyberham]

You may also fine tune a c band actuator using Signal finder...
I didn't know this. I know it moves the dish to a pre-saved motor position when a different satellite is selected. But how can you fine tune (and save?) using Signal Finder? For Ku also?

[el bandido]

I do not use Autofocus. You try to use " Fine movement" option. That is what I use, and nothing else is is running besides Fine movement. After few Fine movements, the box becomes sluggish in every use: when browsing the channel list or any other list in the menus.


I don't think you understand. If nothing else was running, then your receiver would not work!

Several things are always running in the system. The spinner shows there is a slow down in the system. It is going to be hard to fix without seeing the problem as it does not exist here. Typing top in terminal shows some of the processes that are running. Typing opkg list-installed in terminal will show a good listing of items. The problem may/may not have anything to do with Posditioner setup.

[el bandido]

I didn't know this. I know it moves the dish to a pre-saved motor position when a different satellite is selected. But how can you fine tune (and save?) using Signal Finder? For Ku also?

You are not using a actuator and positioner...

A c band actuator usually has a controller or positioner. The controller or positioner has provisions for saving locations. A ku motor does not have these options.

[cyberham]

...A c band actuator usually has a controller or positioner. The controller or positioner has provisions for saving locations. A ku motor does not have these options.
So you use the controller or positioner to actually fine tune and then save the position in that box. The Signal Finder just displays the results.

[el bandido]

Here is a good transponder to test the signal-below-lock feature. You need about 12.6 db for Lock and about 13.5 db for picture. This feed will be active for a while.

Satellite = 89w - c band
Transponder = DVB-S2 32APSK 4080V / 36499 / 3/4

18149



Scan Report

< File created on Thursday, March 28, 2024 at 12:44:33 >
< Satellite = 89.0W C-band Galaxy 28 89.1 W >
< Receiver = SF8008-Supreme >
< Enigma2 Image = Tnap 5 >
< Kernel Version = 4.4.35 >
< DVB Driver Date = 2023-07-25 >
< Blindscan Frequency Range = 3625 to 4800 MHz >
< Blindscan Symbol Rate Range = 1 to 60 Msps >
< Blindscan Only Free Channels or Services? = False >
< Tuner = Tuner A: AVL62X1 (DVB-S2) >


< 'DVB-S2 8PSK 4031H / 15001 / 5/6' > Tp# 1
< Transponder SNR =['1.38db'-UnLocked], LNB Power = 84.41 >
< Thu, 28 Mar 2024 12:44:45 />

< 'DVB-S2 32APSK 4080V / 36499 / 3/4' > Tp# 2
< [1] CAM 17 - 17 GREEN 1:0:1:9:1:FFFF:A958FF0:0:0:0: SNR = 13.0 />
< [2] CAM 15 GREEN 1:0:1:A:1:FFFF:A958FF0:0:0:0: SNR = 13.0 />
< [3] CAM 10 GREEN 1:0:1:B:1:FFFF:A958FF0:0:0:0: SNR = 13.0 />
< [4] BEAUTY 1:0:1:C:1:FFFF:A958FF0:0:0:0: SNR = 13.0 />
< [5] RF CAM 1 1:0:1:D:1:FFFF:A958FF0:0:0:0: SNR = 13.0 />
< [6] RF CAM 3 1:0:1:E:1:FFFF:A958FF0:0:0:0: SNR = 13.0 />
< [7] RF CAM 5 1:0:1:F:1:FFFF:A958FF0:0:0:0: SNR = 13.0 />
< [8] OBTW 1:0:1:10:1:FFFF:A958FF0:0:0:0: SNR = 13.0 />
< Transponder SNR =['13.0db'-Locked], LNB Power = 91.75 >
< Thu, 28 Mar 2024 12:44:52 />

< 'DVB-S2 8PSK 4170H / 11501 / 3/4' > Tp# 3
< [9] NCAA Div 2 1:0:19:1:1:1:A95104A:0:0:0: SNR = 13.51 />
< Transponder SNR =['13.51db'-Locked], LNB Power = 91.75 >
< Thu, 28 Mar 2024 12:44:55 /> <

Blind Scan Time = 2 Min. 03 Sec.
9 Channels ( TV = 9 Radio = 0) 3 of 3 Transponders Scanned.

[lme]

Well, I flushed mio with a backup from 2024-3-12 (before 2024-3-24 update !), and no more sluggish box !!!

[el bandido]

Tnap 5 crash when doing a new manual scan of ATSC channels.

See if an online update fixes your crash.

[Megatron817]

See if an online update fixes your crash.

Nope. didn't see an update for the service scan.

[el bandido]

The problem is a mixing of enigma2. TNAP5.1 updates were added to the TNAP 5 feeds. So it causes errors. The only way to fix it is to load an image that does not contain the errors. Online updates do not work because the tainted enigma2 shows a higher version than TNAP 5. The only way out is to load a backup or image that does not have this problem. Apologies are in order for this error!

[Megatron817]

The problem is a mixing of enigma2. TNAP5.1 updates were added to the TNAP 5 feeds. So it causes errors. The only way to fix it is to load an image that does not contain the errors. Online updates do not work because the tainted enigma2 shows a higher version than TNAP 5. The only way out is to load a backup or image that does not have this problem. Apologies are in order for this error!

I was able to fix it by swapping out the serviceScan from another older copy of tnap 5. No problems and I like how everything is working so far with the blindScan of 105W C band. Doesn't hang any more. Thanks!

[el bandido]

A manual motor start has been added to the blindscan plugin. I am not going to fool with trying to put tease features in the TNAP5 version and plan to add these updates to the 5.1 version.

Really there are only two ways to identify a satellite in a FTA receiver. The first way is to receive the satellite beacon, which is 100% accurate, but impossible AFAIK for a FTA satellite receiver to do. The second way is to use transponder signals.

Using transponder signals for satellite identification in a FTA receiver is nothing short of messy We do not have a decent source of transponder information that is updated regularly and contains the information needed for satellite identification. Shown in the video below is what I am talking about. At least half of the satellites viewable in North America do not have the first transponder in the satellites.xml list active.

Satellites come and go. Transponders are active, then become inactive....etc. There are dedicated groups in Europe who keep their satellites.xml list updated, but not a single person does that in North America.The exception would be the occasional person who posts to Lyngsat hoping their find will be added. Once something is added to Lyngsat in North America, it usually stays there for months or years after it becomes inactive. So Lyngsat is better than nothing, but almost useless.

TVROSAT is supposed to have accurate satellite listings, but much of their stuff is either outdated, wrong, or Both.

So the basic thing is an active satellite transponder needs to be installed First in the satellites.aml file for each orbit location both C and Ku band that are viewable in North America. Then the list has to be maintained else satellites will quit identifying when accessed by the blindscan plugin. The video below shows what that looks like. And this is exactly Why satellite identification is not in current TNAP images.

It would be nice to have every available satellite identify when called in the blindscan plugin. But in North America, that is probably more of a Pipe Smokin' Dream than anything else.


[Only registered and activated users can see links]

[el bandido]

Currently the only Edision 4K I have that works is the MIO. Some of this stuff is difficult to do and impossible to check without having the actual receiver. TNAP5.1 test images are being added to the Flash image of the receiver. The MIO I can check, but the other two Edision's I cannot check.

18179

[lme]

Currently the only Edision 4K I have that works is the MIO. Some of this stuff is difficult to do and impossible to check without having the actual receiver. TNAP5.1 test images are being added to the Flash image of the receiver. The MIO I can check, but the other two Edision's I cannot check.

18179

So, I take it that there is a test 5.1 image for osmio 4K plus also.
Maybe there should be a new thread named "TNAP-5.1 image discussions". Just a suggestion.

[el bandido]

There is only so much time in a day....

[ArloG]

So little time. Dunno if a chinabox receiver like the dreamlink t5 or linkbox 8000 that I have are considered 'fta'. But both do in fact identify satellites by beacon ID.
I always wondered why E2 receivers didn't do the same thing. There must be a secret.

EB. Your gut feeling. Is the SF8008 Supreme a good idea to buy right now? Seems like you've given it the torture test.
I know you're interested in good bluetooth functionality. What about a proven USB BT dongle?

Could you do a brief on which image/tuner driver combo seems to be working the best?
And perhaps a quick comparison rundown of your mio and the 8008. There is a whole lot of stuff up there.

[el bandido]

Ali chipsets...Lol. Talk is cheap! Please demonstrate Today with a video the satellite identification ability of the dreamlink t5 or linkbox 8000. Make a video of these receivers properly identifying every satellite in your entire c band arc Today. Thanks in Advance because I know you will do this! In the name of Science, It Must Be Done!

The SF8008 Supreme is a decent FTA receiver. There is a thread on the Supreme. The "New" Supreme is nothing more than a new receiver using mostly dated parts. Pretty much that it is it. There are pluses and minuses when comparing the Supreme to a MIO. Currently the SF8008 Supreme or one of its variants is the only thing on the market. Everything about it that I have found has been covered in the thread already. Anything else I find will be added. Take it or leave it. No arm twisting required.

[ArloG]

There is really no need to prove anything. I don't BS. I would invite you to do the same if you doubt me. I'm sure you must have a similar receiver in "the pile".
Matter of fact. When trying to hunt and store sats into my ASC-1 with the mio currently used. There was a bit of wtf trying to figure out which one I was on.
You know. The overlapping ku sat signals. I'm thinking like on 117-119 (example). Where the LO for 119 would have to been set at 11250 with the correct lnbf.
A blindscan results in transponders that just-don't-exist. Leading again to a scratch your ass and wtf!-mumble.
Until you realize you're getting bleed over from 119 (maybe). Dust off that T5. Slap it on the coax. Enter the tp's in question into the menu along with ones you know are...117. And wa-frikin'-la!
Toggle through them and the beacon ID shows right up in the screen. Ahh sweahs fo' god.
If anyone has an ASC-1 up for grabs Please let me know. As long as it works. I don't care about flaky relays. I've been parked on 127W for way too long.
Then we can drink a lot of beer and put fans in front of us and see who gets wet first. I'll post enough photos to have breakfast over.

The SF8008 Supreme with 2 identical AVL tuners enough is enticing. And the communities look as if the deficiencies are at least being identified. That's why I axed.
Getting out of the Broadcom chipset world into the new ones is a bit questionable as far as what the manufacturers are willing to address and modify code.

[el bandido]

Okay then you had a "Special Model" FTA Receiver.
FTA receivers with Ali chipsets Did Not have beacon satellite identification. They used a satellite file or file similar to it. Satellite ID was done using the satellite transponders for satellite identification---same as the rest of the FTA receivers, enigma2 included.

[cyberham]

18179
When I tried to install TNAP5.1 from online, I got following error.
18185

[el bandido]

I will fix that later today and start a proper 5.1 thread. Thanks for checking!

[el bandido]

The TNAP5.1 test images should be online now under Flash image in receiver files.. This includes ustym4kpro

I do not have all of these receivers so I need to know if the images are not available. Will start a 5.1 thread soon.

[cyberham]

The TNAP5.1 test images should be online now under Flash image in receiver files..
Downloaded for osmio4kplus. The autoinstall worked well. Nice to have a new image installed and all my user files are as before the new install. So far, so good.

[lme]

5.1 version for osmio4k+:
picons can not be set up to show on Favourites list next or before the channel name.
neither any channel info. can be set up from any menu, or maybe it has been moved.

1818618187

Something like this:
18188

[el bandido]

For picon info, see the link: [Only registered and activated users can see links]

If the problem(s) or issues cannot be resolved, then post about them in the 5.1 thread.

Thanks for your efforts!

[jsda30]

hi master.... great job....
i installed the tnap image on my edision os mio 4k...but its are broken... not electric connection!
now i have a octagon sf8008 combo... i want to install tnap image for get the channels under 10750 at 26e with universal lnb...
can you tell me if they can get this tp: 10493 H DVB-S2/8PSK 1000 3/5 at 25E?
or only work with the edision os mio avl6261 turner modification?
thanks in advanced!!

[el bandido]

The band for a FTA receiver is usually 950-2150MHz. These are the frequencies that come from the lnb.
The Edision drivers were modified so the band is 700MHz to 2150. Unfortunately, there is no modification for the SF8008 that will allow this. So the Sf8008 will not work. Sorry.

It might be possible in the future to modify the SF8008 Supreme because it has AVL6261C. But not today...

[stephan94]

now i have a octagon sf8008 combo... i want to install tnap image for get the channels under 10750 at 26e with universal lnb...
can you tell me if they can get this tp: 10493 H DVB-S2/8PSK 1000 3/5 at 25E?
or only work with the edision os mio avl6261 turner modification?

Hello
it only works for "Edision" receivers.
in the plugins, the "extras" with this possibility is not present

[el bandido]

Correct!
The Extra Plugins that allow the extended band can only be seen by Edision receivers. There is no need to show these Extra Plugins to other receivers besides Edision because they Do not work on other receiver models.